STD Tuning Engine FS: M110 MANUAL FLYWHEEL

FS: M110 MANUAL FLYWHEEL

FS: M110 MANUAL FLYWHEEL

 
  • 0 Vote(s) - 0 Average
 
Austincarnut
Holset

298
03-06-2017, 07:47 PM #1
I have a M110 manual flywheel for sale if any of you are interested.  Asking $275 obo + shipping / trades considered.   I have seen these bolted to OM616 and OM617's as a much lighter alternative (-10lbs I believe) to the correct 300D or 240D choices.  The casting number is 1080320501 and is obsolete in the EPC.  It can also be found online and in old parts listings for MB. It was originally fitted to R107's, W126's, W123's, etc with the 280 designation.  I can email pics if interested
This post was last modified: 03-06-2017, 07:47 PM by Austincarnut.
Austincarnut
03-06-2017, 07:47 PM #1

I have a M110 manual flywheel for sale if any of you are interested.  Asking $275 obo + shipping / trades considered.   I have seen these bolted to OM616 and OM617's as a much lighter alternative (-10lbs I believe) to the correct 300D or 240D choices.  The casting number is 1080320501 and is obsolete in the EPC.  It can also be found online and in old parts listings for MB. It was originally fitted to R107's, W126's, W123's, etc with the 280 designation.  I can email pics if interested

NZScott
HX30W 73/44mm

398
03-06-2017, 09:08 PM #2
What size clutch on that one? 228 or 240? I think it'd be 228 right?


1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




NZScott
03-06-2017, 09:08 PM #2

What size clutch on that one? 228 or 240? I think it'd be 228 right?



1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




Austincarnut
Holset

298
03-07-2017, 07:32 PM #3
(03-06-2017, 09:08 PM)NZScott What size clutch on that one? 228 or 240? I think it'd be 228 right?

The clutch area is about 235mm so it is a 228.
Austincarnut
03-07-2017, 07:32 PM #3

(03-06-2017, 09:08 PM)NZScott What size clutch on that one? 228 or 240? I think it'd be 228 right?

The clutch area is about 235mm so it is a 228.

NZScott
HX30W 73/44mm

398
03-07-2017, 08:58 PM #4
Aha.
I could do with one instead of "ruining" a good 617 flywheel for my BMW PP setup but shipping across the puddle is just not sensible


1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




NZScott
03-07-2017, 08:58 PM #4

Aha.
I could do with one instead of "ruining" a good 617 flywheel for my BMW PP setup but shipping across the puddle is just not sensible



1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




Austincarnut
Holset

298
03-07-2017, 09:58 PM #5
here it is...
Attached Files
Image(s)
       
Austincarnut
03-07-2017, 09:58 PM #5

here it is...

Attached Files
Image(s)
       

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)