Om617 timing.
Om617 timing.
04-18-2017, 12:24 PM
#1
Cstolaircraft
04-18-2017, 12:24 PM #1Just needing to do a double check... I have a ip lock tool currently it's locking at 18 atdc... for performance I know time to 26-7 btdc... with it locking at 18 atdc my timing is currently 20 degrees btdc?
04-18-2017, 01:01 PM
#2
Engine is set at 24° btdc and pump gear is aligned with the mark. The pump gear only slides in the grooves in one sense.
After that advance is done by rotating the pump against the block.
FD,
Powered by tractor fuel
04-19-2017, 01:49 AM
#4
Instalation method got to do with getting the engine running rather than tune the timming for best perfoance.
22° start of injection is suposed to be advaced.
But how do u know wich is the best time set to your engine?
By listening and watch the behaviour, or using a timming device. But even with a timming device it may need small adjustment.
Either advance or retard....
FD,
Powered by tractor fuel
Yes a bit of topic...
Instalation method got to do with getting the engine running rather than tune the timming for best perfoance.
22° start of injection is suposed to be advaced.
But how do u know wich is the best time set to your engine?
By listening and watch the behaviour, or using a timming device. But even with a timming device it may need small adjustment.
Either advance or retard....
FD,
Powered by tractor fuel
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)