Repair of leaking prechambers
Repair of leaking prechambers
OM603.960 engine
I ofcoarse have trouble with leaks around the prechambers, some small leaks at cyl 3 and 4, but after I checked my nozzles, I`ve got a decent leak at cylinder 1, It`s squirting diesel out of the half-moon next to the prechamber-locking-nut, and the engine runs om 5 cylinders at idle.
I have ofcoarse checked the nozzle/injector, changed the injector seal ring. But Cant find anything.
I have bought a socket with the correct splines(KLANN KL-0369-3), and will try to pull them out tomorrow, but I dont have the grinding tool, or shims, I`m going to make a tool for pulling out the prechamber from a used nozzle.
Do you have any tips forr me, what I should do, how?
I`m thinking about using a thin copper or aluminium washer for the seal if I need to, and maybe take a little cut in the prechambers to keep correct position of them.
Do you have anything for me, experinces, other stuff.
Thanks from Norway...
Hi, I have a `91 300 TD Turbo(Euro/Norwegian).
OM603.960 engine
I ofcoarse have trouble with leaks around the prechambers, some small leaks at cyl 3 and 4, but after I checked my nozzles, I`ve got a decent leak at cylinder 1, It`s squirting diesel out of the half-moon next to the prechamber-locking-nut, and the engine runs om 5 cylinders at idle.
I have ofcoarse checked the nozzle/injector, changed the injector seal ring. But Cant find anything.
I have bought a socket with the correct splines(KLANN KL-0369-3), and will try to pull them out tomorrow, but I dont have the grinding tool, or shims, I`m going to make a tool for pulling out the prechamber from a used nozzle.
Do you have any tips forr me, what I should do, how?
I`m thinking about using a thin copper or aluminium washer for the seal if I need to, and maybe take a little cut in the prechambers to keep correct position of them.
Do you have anything for me, experinces, other stuff.
Thanks from Norway...
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
There should be a crush washer that sits under the prechamber (at least there is on the om617) and this should be all thats needed to replace. They are very cheap as well $1.50 or so here.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
The engine runs well now, but I want to change the nozzles soon, they have only gone 420 000 km, almost as new :-D
The prechamber nut was actually loose, this in company whith dieselleaks from injector and return-hoses, and som "shit" inside the injector made driving a living hell with diesel-gas and headakes...
The engine runs well now, but I want to change the nozzles soon, they have only gone 420 000 km, almost as new :-D
2 Guest(s)
2 Guest(s)