STD Tuning Engine OM603 superturbo question

OM603 superturbo question

OM603 superturbo question

 
  • 0 Vote(s) - 0 Average
 
Lången
Naturally-aspirated

10
06-09-2019, 10:18 AM #1
How much boost can i put in to my om603? It has homebuilt extractor, hx35 #12 separate 50mm wastegate. 3" exhaust. 7.5mm pump. Is it safe whit 1.5 bar?
Lången
06-09-2019, 10:18 AM #1

How much boost can i put in to my om603? It has homebuilt extractor, hx35 #12 separate 50mm wastegate. 3" exhaust. 7.5mm pump. Is it safe whit 1.5 bar?

barrote
Superturbo

1,627
06-09-2019, 10:50 AM #2
That is gay boost ...

FD,
Powered by tractor fuel
barrote
06-09-2019, 10:50 AM #2

That is gay boost ...


FD,
Powered by tractor fuel

Lången
Naturally-aspirated

10
06-09-2019, 10:32 PM #3
Haha ok...how much boost shall i go for?
Lången
06-09-2019, 10:32 PM #3

Haha ok...how much boost shall i go for?

Anjay1
K26-2

38
06-10-2019, 12:11 PM #4
At least 2 bar.
Anjay1
06-10-2019, 12:11 PM #4

At least 2 bar.

Lången
Naturally-aspirated

10
06-15-2019, 06:36 AM #5
Can the motor handle 2 bar on a daily driver?
Lången
06-15-2019, 06:36 AM #5

Can the motor handle 2 bar on a daily driver?

Anjay1
K26-2

38
06-15-2019, 11:14 AM #6
It will be fine. Boost at that level is only while you accelerate. Once you get to speed it will settle to much lower level as demand for fuel will be less.
Anjay1
06-15-2019, 11:14 AM #6

It will be fine. Boost at that level is only while you accelerate. Once you get to speed it will settle to much lower level as demand for fuel will be less.

awsrock
300SDL / HX30 / 90cc

179
06-18-2019, 09:14 PM #7
Herlevi pump builders told me stock 603 headgasket can handle 2.5 bar but obviously if its old maybe a bit less
awsrock
06-18-2019, 09:14 PM #7

Herlevi pump builders told me stock 603 headgasket can handle 2.5 bar but obviously if its old maybe a bit less

Lången
Naturally-aspirated

10
06-20-2019, 03:48 AM #8
Sounds good!
This post was last modified: 06-20-2019, 03:49 AM by Lången.
Lången
06-20-2019, 03:48 AM #8

Sounds good!

Mallinman
GT2256V

101
06-20-2019, 01:15 PM #9
How much pressure can the stock 606 head gaskets take then??

Mitsubishi L200 manual om605  
7.5mm Bosch 044 fed pump 
Borgwarner S200 
Mallinman
06-20-2019, 01:15 PM #9

How much pressure can the stock 606 head gaskets take then??


Mitsubishi L200 manual om605  
7.5mm Bosch 044 fed pump 
Borgwarner S200 

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 5 Guest(s)
Users browsing this thread:
 5 Guest(s)