722.6 V-8 bellhousing used for conversion.

STD Tuning Drivetrain 722.6 V-8 bellhousing used for conversion.

722.6 V-8 bellhousing used for conversion.

722.6 V-8 bellhousing used for conversion.

View a Printable Version

0 Vote(s) - 0 Average

Naturally-aspirated

4

07-02-2019, 12:47 PM #1

Does using a 722.6 transmission with a bellhousing from say a 5.7L V-8 Mopar allow for more possibilities for different convertors than swapping on an inline 6 bellhousing that bolts right up? In other words, does using the correct bellhousing for a OM606 limit your choices for different and/or aftermarket convertors for the 722.6?

Blackstack

07-02-2019, 12:47 PM #1

Does using a 722.6 transmission with a bellhousing from say a 5.7L V-8 Mopar allow for more possibilities for different convertors than swapping on an inline 6 bellhousing that bolts right up? In other words, does using the correct bellhousing for a OM606 limit your choices for different and/or aftermarket convertors for the 722.6?

firen456

TA 0301

73

07-03-2019, 12:39 AM #2

simply yes. Only small converters fit in the inline housing.

firen456

07-03-2019, 12:39 AM #2

simply yes. Only small converters fit in the inline housing.

Holset

559

07-14-2019, 02:04 PM #3

Why would you want put a different converter in? For a higher Stall? if so just have yours modified. It is cheap and easy to do.

http://soundgermanautomotive.com
facebook

whipplem104

07-14-2019, 02:04 PM #3

Why would you want put a different converter in? For a higher Stall? if so just have yours modified. It is cheap and easy to do.

http://soundgermanautomotive.com
facebook

View a Printable Version

0 Vote(s) - 0 Average

Users browsing this thread:
2 Guest(s)

Users browsing this thread:
2 Guest(s)