STD Tuning Drivetrain 722.6 Torque Converter Lockup in W220 S320CDI

722.6 Torque Converter Lockup in W220 S320CDI

722.6 Torque Converter Lockup in W220 S320CDI

 
  • 1 Vote(s) - 5 Average
 
Riverstick
GT2256V

114
01-16-2011, 07:00 AM #1
Looking for some information on improving the transmission on my W220 S320 CDI. The car drives very well and shifts satisfactorily. What I am planning to do is tune the engine a little(maybe 300BHP)but the CDI is a high torque low revving unit. To take maximum advantage of this I would need the shift points signicantly lower and I would like to see torque converter lockup at 1000rpm. My W211 E220CDI 722.6 automatic locks up at 1200rpm and performs magnificently whilst returning a consistent 1000km for each tankful of diesel.

(1) Do we just do this by programming....and if so is this done by an engine chiptuner or by a Merc dealer? or is there an aftermaket variable tuning box which can be installed just like some American pick up trucks.

(2) Do we intall a torque converter like this? http://www.protorqueconverters.com/2.html

(3) Do we use some Lucas oil in the transmission as we have used this in our heavy trucks with great results http://www.lucasoil.com/

(4) Should we just fit a 6 speed transmission. The availabilty of a gearbox,pedal box,pedals or the work involved etc doesn't bother me too much but can it be done electronically? In other words,can the vehicle onboard ecu(s) be reconfigured to run a manual transmission?

All points of view greatly appreciated!

" It is far easier to get forgiveness rather than permission"
Riverstick
01-16-2011, 07:00 AM #1

Looking for some information on improving the transmission on my W220 S320 CDI. The car drives very well and shifts satisfactorily. What I am planning to do is tune the engine a little(maybe 300BHP)but the CDI is a high torque low revving unit. To take maximum advantage of this I would need the shift points signicantly lower and I would like to see torque converter lockup at 1000rpm. My W211 E220CDI 722.6 automatic locks up at 1200rpm and performs magnificently whilst returning a consistent 1000km for each tankful of diesel.

(1) Do we just do this by programming....and if so is this done by an engine chiptuner or by a Merc dealer? or is there an aftermaket variable tuning box which can be installed just like some American pick up trucks.

(2) Do we intall a torque converter like this? http://www.protorqueconverters.com/2.html

(3) Do we use some Lucas oil in the transmission as we have used this in our heavy trucks with great results http://www.lucasoil.com/

(4) Should we just fit a 6 speed transmission. The availabilty of a gearbox,pedal box,pedals or the work involved etc doesn't bother me too much but can it be done electronically? In other words,can the vehicle onboard ecu(s) be reconfigured to run a manual transmission?

All points of view greatly appreciated!


" It is far easier to get forgiveness rather than permission"

 
  • 1 Vote(s) - 5 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)