Hella 500 roll call.
Hella 500 roll call.
04-26-2011, 03:54 PM
#1
Pics would be awesome!
1981 Mercedes 300TD Lowered 4 speed manual Holset HX30
mike-81-240d
04-26-2011, 03:54 PM #1Who has 'em? I know Will B, and brabus have them... Who else? Still on the fence about installing some.
Pics would be awesome!
1981 Mercedes 300TD Lowered 4 speed manual Holset HX30
04-30-2011, 10:04 PM
#3
(04-26-2011, 11:52 PM)garage I love the way they have them mounted.
I would love to install some when i get another w123.
Do you have a pic of the way they mounted them? I have a set at my house, and have been thinking about it myself.
turbodrabbit
04-30-2011, 10:04 PM #3(04-26-2011, 11:52 PM)garage I love the way they have them mounted.
I would love to install some when i get another w123.
Do you have a pic of the way they mounted them? I have a set at my house, and have been thinking about it myself.
05-01-2011, 09:22 AM
#4
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
05-01-2011, 09:22 AM #4I just measured out the holes and drilled them in the aluminum bumper but I have American bumpers that stick out far enough to do that! Then I put the nuts on the bottom side
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
![[Image: IMG_3646.jpg]](http://i425.photobucket.com/albums/pp338/mikeyboats/Project%20Smush%20Rise%20of%20the%20Turbo/IMG_3646.jpg)
![[Image: IMG_3629.jpg]](http://i425.photobucket.com/albums/pp338/mikeyboats/Project%20Smush%20Rise%20of%20the%20Turbo/IMG_3629.jpg)
07-22-2011, 04:40 PM
#7
![[Image: IMG_3887.jpg]](http://i425.photobucket.com/albums/pp338/mikeyboats/IMG_3887.jpg)
1981 Mercedes 300TD Lowered 4 speed manual Holset HX30
mike-81-240d
07-22-2011, 04:40 PM #7Frenched the low spec fogs, and the hella 500 driving lights last night...
1981 Mercedes 300TD Lowered 4 speed manual Holset HX30
07-22-2011, 04:59 PM
#8
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
07-22-2011, 04:59 PM #8Nice!
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
07-29-2012, 10:47 PM
#9
2001 Dodge Ram 2500 QCSB 4x4 5spd - NV4500 Swap, 3600# SD from Kenny's, 150HP Jammer Nozzles, RSD 4" Down Pipe to 5" Straight Pipe, AEM Intake, Glowshift Tranny, Boost, Oil Temp, Raptor 150, Big Line Kit Tank to VP, Leveled, Recon Smoked Cab Lights (Waiting on a Quadzilla 4k, 110# valve springs, billet push rods, and head studs. Finally be able to turn 4300 RPM's)
1983 Mercedes Benz 300DT Auto - Short ram intake - ALDA maxed out
cummins9301
07-29-2012, 10:47 PM #9So I really like how these lights look. Any certain brand to go with or could I just rig something of my own up. Not familiar with the whole Hella 500 thing so you will have to excuse me lol.
2001 Dodge Ram 2500 QCSB 4x4 5spd - NV4500 Swap, 3600# SD from Kenny's, 150HP Jammer Nozzles, RSD 4" Down Pipe to 5" Straight Pipe, AEM Intake, Glowshift Tranny, Boost, Oil Temp, Raptor 150, Big Line Kit Tank to VP, Leveled, Recon Smoked Cab Lights (Waiting on a Quadzilla 4k, 110# valve springs, billet push rods, and head studs. Finally be able to turn 4300 RPM's)
1983 Mercedes Benz 300DT Auto - Short ram intake - ALDA maxed out
07-31-2012, 08:38 PM
#10
(07-29-2012, 10:47 PM)cummins9301 So I really like how these lights look. Any certain brand to go with or could I just rig something of my own up. Not familiar with the whole Hella 500 thing so you will have to excuse me lol.
You can do whatever you like, its your car!! Hella 500's are just the classic lamp that everybody uses. Be careful which ones you get though, I have seen "driving" 500's, which are basically like super high-beams, and also "fog" 500's, obviously for fog. I guess it just depends on what you are looking to do with them and with the car
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
07-31-2012, 08:38 PM #10(07-29-2012, 10:47 PM)cummins9301 So I really like how these lights look. Any certain brand to go with or could I just rig something of my own up. Not familiar with the whole Hella 500 thing so you will have to excuse me lol.
You can do whatever you like, its your car!! Hella 500's are just the classic lamp that everybody uses. Be careful which ones you get though, I have seen "driving" 500's, which are basically like super high-beams, and also "fog" 500's, obviously for fog. I guess it just depends on what you are looking to do with them and with the car
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
07-31-2012, 11:51 PM
#11
2001 Dodge Ram 2500 QCSB 4x4 5spd - NV4500 Swap, 3600# SD from Kenny's, 150HP Jammer Nozzles, RSD 4" Down Pipe to 5" Straight Pipe, AEM Intake, Glowshift Tranny, Boost, Oil Temp, Raptor 150, Big Line Kit Tank to VP, Leveled, Recon Smoked Cab Lights (Waiting on a Quadzilla 4k, 110# valve springs, billet push rods, and head studs. Finally be able to turn 4300 RPM's)
1983 Mercedes Benz 300DT Auto - Short ram intake - ALDA maxed out
cummins9301
07-31-2012, 11:51 PM #11Ok thanks. I looked into it a little more after I posted that up. Thanks for the info.
2001 Dodge Ram 2500 QCSB 4x4 5spd - NV4500 Swap, 3600# SD from Kenny's, 150HP Jammer Nozzles, RSD 4" Down Pipe to 5" Straight Pipe, AEM Intake, Glowshift Tranny, Boost, Oil Temp, Raptor 150, Big Line Kit Tank to VP, Leveled, Recon Smoked Cab Lights (Waiting on a Quadzilla 4k, 110# valve springs, billet push rods, and head studs. Finally be able to turn 4300 RPM's)
1983 Mercedes Benz 300DT Auto - Short ram intake - ALDA maxed out
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)