OM606 max performance?
OM606 max performance?
02-29-2012, 11:00 AM
#1
GeorgeHasmanda
02-29-2012, 11:00 AM #1Hello guys.I wanted to ask,where is the maximum performance of OM606 engine with stock engine(pistons,camshafts,connecting rods etc...).thak you very much for your answers
02-29-2012, 04:47 PM
#2
(02-29-2012, 11:00 AM)GeorgeHasmanda Hello guys.I wanted to ask,where is the maximum performance of OM606 engine with stock engine(pistons,camshafts,connecting rods etc...).thak you very much for your answers
I have seen one OM606 with stiffer valvesprings making 614hp and 904nm
EDH_Performance
02-29-2012, 04:47 PM #2(02-29-2012, 11:00 AM)GeorgeHasmanda Hello guys.I wanted to ask,where is the maximum performance of OM606 engine with stock engine(pistons,camshafts,connecting rods etc...).thak you very much for your answers
I have seen one OM606 with stiffer valvesprings making 614hp and 904nm
03-01-2012, 11:07 AM
#3
(02-29-2012, 04:47 PM)EDH_Performancethink you a BMW E30? i see too.think you 500hp no problem?(02-29-2012, 11:00 AM)GeorgeHasmanda Hello guys.I wanted to ask,where is the maximum performance of OM606 engine with stock engine(pistons,camshafts,connecting rods etc...).thak you very much for your answers
I have seen one OM606 with stiffer valvesprings making 614hp and 904nm
GeorgeHasmanda
03-01-2012, 11:07 AM #3(02-29-2012, 04:47 PM)EDH_Performancethink you a BMW E30? i see too.think you 500hp no problem?(02-29-2012, 11:00 AM)GeorgeHasmanda Hello guys.I wanted to ask,where is the maximum performance of OM606 engine with stock engine(pistons,camshafts,connecting rods etc...).thak you very much for your answers
I have seen one OM606 with stiffer valvesprings making 614hp and 904nm
03-02-2012, 05:34 AM
#4
EDH_Performance
03-02-2012, 05:34 AM #4Stock engine can easily put out 500hp with a good manifold, turbo and Injection pump
03-04-2012, 04:05 AM
#7
(03-03-2012, 12:37 AM)tomnik btw. where in CZ are you?I'm from Karlovy Vary.
Tom
(03-02-2012, 10:57 AM)GeorgeHasmanda ok,thank you very much
GeorgeHasmanda
03-04-2012, 04:05 AM #7(03-03-2012, 12:37 AM)tomnik btw. where in CZ are you?I'm from Karlovy Vary.
Tom
(03-02-2012, 10:57 AM)GeorgeHasmanda ok,thank you very much
03-05-2012, 04:57 PM
#8
(02-29-2012, 04:47 PM)EDH_Performancehi,(02-29-2012, 11:00 AM)GeorgeHasmanda Hello guys.I wanted to ask,where is the maximum performance of OM606 engine with stock engine(pistons,camshafts,connecting rods etc...).thak you very much for your answers
I have seen one OM606 with stiffer valvesprings making 614hp and 904nm
what turbo was used to get this amount of power and what pump? how many cc of fuel?
Have you ever heard of a om606 with more power?
wayne
(02-29-2012, 04:47 PM)EDH_Performancehi,(02-29-2012, 11:00 AM)GeorgeHasmanda Hello guys.I wanted to ask,where is the maximum performance of OM606 engine with stock engine(pistons,camshafts,connecting rods etc...).thak you very much for your answers
I have seen one OM606 with stiffer valvesprings making 614hp and 904nm
what turbo was used to get this amount of power and what pump? how many cc of fuel?
Have you ever heard of a om606 with more power?
wayne
03-11-2012, 04:40 PM
#9
(03-05-2012, 04:57 PM)mantaheadI dont know how big the elements was, but it was an HX55 TURBO!(02-29-2012, 04:47 PM)EDH_Performancehi,(02-29-2012, 11:00 AM)GeorgeHasmanda Hello guys.I wanted to ask,where is the maximum performance of OM606 engine with stock engine(pistons,camshafts,connecting rods etc...).thak you very much for your answers
I have seen one OM606 with stiffer valvesprings making 614hp and 904nm
what turbo was used to get this amount of power and what pump? how many cc of fuel?
Have you ever heard of a om606 with more power?
wayne
Haven`t heard of anything higher, but my goal is over 1000NM
EDH_Performance
03-11-2012, 04:40 PM #9(03-05-2012, 04:57 PM)mantaheadI dont know how big the elements was, but it was an HX55 TURBO!(02-29-2012, 04:47 PM)EDH_Performancehi,(02-29-2012, 11:00 AM)GeorgeHasmanda Hello guys.I wanted to ask,where is the maximum performance of OM606 engine with stock engine(pistons,camshafts,connecting rods etc...).thak you very much for your answers
I have seen one OM606 with stiffer valvesprings making 614hp and 904nm
what turbo was used to get this amount of power and what pump? how many cc of fuel?
Have you ever heard of a om606 with more power?
wayne
Haven`t heard of anything higher, but my goal is over 1000NM
03-11-2012, 05:58 PM
#11
(03-11-2012, 05:36 PM)mantahead hi,
A HX55, holy shit, it must have been laggy or was it compound with another turbo? Thats a big turbo.
wayne
a compressor was boosting from idle
Search for "bmw e30 om606" on youtubeYou will also find many pictures of the build some where...
EDH_Performance
03-11-2012, 05:58 PM #11(03-11-2012, 05:36 PM)mantahead hi,
A HX55, holy shit, it must have been laggy or was it compound with another turbo? Thats a big turbo.
wayne
a compressor was boosting from idle
Search for "bmw e30 om606" on youtubeYou will also find many pictures of the build some where...
03-12-2012, 05:34 PM
#12
(03-11-2012, 05:58 PM)EDH_Performancehi,(03-11-2012, 05:36 PM)mantahead hi,
A HX55, holy shit, it must have been laggy or was it compound with another turbo? Thats a big turbo.
wayne
a compressor was boosting from idle
You will also find many pictures of the build some where...
that is a lethal machine.
This post was last modified: 03-12-2012, 05:38 PM by mantahead.
(03-11-2012, 05:58 PM)EDH_Performancehi,(03-11-2012, 05:36 PM)mantahead hi,
A HX55, holy shit, it must have been laggy or was it compound with another turbo? Thats a big turbo.
wayne
a compressor was boosting from idle
You will also find many pictures of the build some where...
that is a lethal machine.
03-16-2012, 02:18 PM
#13
(03-12-2012, 05:34 PM)mantahead1000NM,ou shit(03-11-2012, 05:58 PM)EDH_Performancehi,(03-11-2012, 05:36 PM)mantahead hi,
A HX55, holy shit, it must have been laggy or was it compound with another turbo? Thats a big turbo.
wayne
a compressor was boosting from idle
You will also find many pictures of the build some where...
that is a lethal machine.
have you stock engine?What boost is your goal?over 3bar?GeorgeHasmanda
03-16-2012, 02:18 PM #13(03-12-2012, 05:34 PM)mantahead1000NM,ou shit(03-11-2012, 05:58 PM)EDH_Performancehi,(03-11-2012, 05:36 PM)mantahead hi,
A HX55, holy shit, it must have been laggy or was it compound with another turbo? Thats a big turbo.
wayne
a compressor was boosting from idle
You will also find many pictures of the build some where...
that is a lethal machine.
have you stock engine?What boost is your goal?over 3bar?
03-16-2012, 07:02 PM
#14
(03-16-2012, 02:18 PM)GeorgeHasmandaIt is an Om606 with: Ported head, h-profile rods, main girdle for main bearings, custom header and intake+++ My goal is 1000nm, so i need to change camshafts and valvespring first(03-12-2012, 05:34 PM)mantahead1000NM,ou shit(03-11-2012, 05:58 PM)EDH_Performance a compressor was boosting from idlehi,
You will also find many pictures of the build some where...
that is a lethal machine.
Yes, i think 3+bar is enough, but time will tellEDH_Performance
03-16-2012, 07:02 PM #14(03-16-2012, 02:18 PM)GeorgeHasmandaIt is an Om606 with: Ported head, h-profile rods, main girdle for main bearings, custom header and intake+++ My goal is 1000nm, so i need to change camshafts and valvespring first(03-12-2012, 05:34 PM)mantahead1000NM,ou shit(03-11-2012, 05:58 PM)EDH_Performance a compressor was boosting from idlehi,
You will also find many pictures of the build some where...
that is a lethal machine.
Yes, i think 3+bar is enough, but time will tell
03-18-2012, 07:01 AM
#15
(03-16-2012, 07:02 PM)EDH_PerformanceCould you send me some photos of your engine please?thank you very much , my mail is o.g.65@seznam.cz(03-16-2012, 02:18 PM)GeorgeHasmandaIt is an Om606 with: Ported head, h-profile rods, main girdle for main bearings, custom header and intake+++ My goal is 1000nm, so i need to change camshafts and valvespring first(03-12-2012, 05:34 PM)mantahead hi,1000NM,ou shit
that is a lethal machine.
GeorgeHasmanda
03-18-2012, 07:01 AM #15(03-16-2012, 07:02 PM)EDH_PerformanceCould you send me some photos of your engine please?thank you very much , my mail is o.g.65@seznam.cz(03-16-2012, 02:18 PM)GeorgeHasmandaIt is an Om606 with: Ported head, h-profile rods, main girdle for main bearings, custom header and intake+++ My goal is 1000nm, so i need to change camshafts and valvespring first(03-12-2012, 05:34 PM)mantahead hi,1000NM,ou shit
that is a lethal machine.
03-19-2012, 08:01 AM
#16
(03-18-2012, 07:01 AM)GeorgeHasmandaCheck out my "norwegian Build" in the project threads(03-16-2012, 07:02 PM)EDH_PerformanceCould you send me some photos of your engine please?thank you very much , my mail is o.g.65@seznam.cz(03-16-2012, 02:18 PM)GeorgeHasmanda 1000NM,ou shitIt is an Om606 with: Ported head, h-profile rods, main girdle for main bearings, custom header and intake+++ My goal is 1000nm, so i need to change camshafts and valvespring first
EDH_Performance
03-19-2012, 08:01 AM #16(03-18-2012, 07:01 AM)GeorgeHasmandaCheck out my "norwegian Build" in the project threads(03-16-2012, 07:02 PM)EDH_PerformanceCould you send me some photos of your engine please?thank you very much , my mail is o.g.65@seznam.cz(03-16-2012, 02:18 PM)GeorgeHasmanda 1000NM,ou shitIt is an Om606 with: Ported head, h-profile rods, main girdle for main bearings, custom header and intake+++ My goal is 1000nm, so i need to change camshafts and valvespring first
07-22-2012, 04:34 PM
#18
http://forums.tdiclub.com/showthread.php...hlight=vnt
there are clams of machines 700-900hp but not any dyno paper or some other evidence. I have heard of other stories of other monsters but still not been able to confirm them
search on jeemu and you find some nice stuff but there are more
If you look at
http://forums.tdiclub.com/showthread.php...hlight=vnt
there are clams of machines 700-900hp but not any dyno paper or some other evidence. I have heard of other stories of other monsters but still not been able to confirm them
search on jeemu and you find some nice stuff but there are more
11-04-2012, 09:19 AM
#20
GeorgeHasmanda
11-04-2012, 09:19 AM #20Hello diesel maniacs.i have question,I have Om606 and i dont now how injection pump need I? Dieselmenken said 7.5 elements and 180cc a RS203 pump. This pump is from OM603 w124 or no?How I improve cc? an pumps camshaft is ok for 500hp or no? thanks very much
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)