Stupid Question But I'm Asking Anyway.....
Stupid Question But I'm Asking Anyway.....
1987 Mercedes 300SDL Super Turbo Restore/Project
Even though they are both W126's.... Will the seats from a 1984 380SEL fit in a 1987 300SDL without any wiring modifications on the electrical components? I haven't pulled the seats from my SDL yet, and I dont really want to yank them if its not a direct plug and play electrically. Thanks in advance to those who answer my stupid question.
1987 Mercedes 300SDL Super Turbo Restore/Project
1987 Mercedes 300SDL Super Turbo Restore/Project
Well to answer my own stupid question..... Yes it does fit and no it is not plug and play. I had to modify a few of the connectors and change out all the electrical components from my old seat to the new seat. It was a royal pain in the ass but hey now I have a comfy new seat :-)
1987 Mercedes 300SDL Super Turbo Restore/Project
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
11-20-2013, 09:36 AM #3Thanks for posting back. Somebody's going to need to know one day
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **
S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **
OBK# 62
SurfRodder
11-24-2013, 12:40 AM #4For future reference, I upgraded the seats in my '87 300D with some from a '93 400E (or maybe 300E) and had to swap out the bottom brackets/motor ass'y from my old ones onto the new ones...there is likely a way to make the new ones fit but several connectors were significantly different (and more wires total, maybe seat heaters?) Anyway, after the bracket swap, all was well...
W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **
S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **
OBK# 62
1 Guest(s)
1 Guest(s)