Looking for OM606 or 605 turbo water pump housing

STD Other FS / WTB / Buying guides Looking for OM606 or 605 turbo water pump housing

Looking for OM606 or 605 turbo water pump housing

Looking for OM606 or 605 turbo water pump housing

View a Printable Version

0 Vote(s) - 0 Average

Holset

420

03-03-2015, 04:32 PM #1

as above.

____________________________________

'88 300CD Turbo Coupé - OM603

DiseaselWeasel

03-03-2015, 04:32 PM #1

as above.

____________________________________

'88 300CD Turbo Coupé - OM603

Holset

420

03-04-2015, 04:51 PM #2

Part number for water pump housing: 603 201 08 01 or 605 201 01 01

and also looking for water pump pulley with number 603 205 01 10

thanks!!

____________________________________

'88 300CD Turbo Coupé - OM603

DiseaselWeasel

03-04-2015, 04:51 PM #2

Part number for water pump housing: 603 201 08 01 or 605 201 01 01

and also looking for water pump pulley with number 603 205 01 10

thanks!!

____________________________________

'88 300CD Turbo Coupé - OM603

barrote

Superturbo

1,627

03-05-2015, 12:32 PM #3

got one here at 50 euro Smile

Smile

in the box like new!!!
pytta u´re so far Sad

Sad

This post was last modified: 03-05-2015, 12:33 PM by barrote.

FD,
Powered by tractor fuel

barrote

03-05-2015, 12:32 PM #3

got one here at 50 euro Smile in the box like new!!!
pytta u´re so far Sad

FD,
Powered by tractor fuel

Holset

420

03-05-2015, 03:24 PM #4

New on the counter is 100€... So.

____________________________________

'88 300CD Turbo Coupé - OM603

DiseaselWeasel

03-05-2015, 03:24 PM #4

New on the counter is 100€... So.

____________________________________

'88 300CD Turbo Coupé - OM603

barrote

Superturbo

1,627

03-05-2015, 05:54 PM #5

hargg ,
u´re too far , shipping it to germany is really expensive . i can check though , 50 € euro for me and shiping on u. the pulley u want is a stock puley or something exotic? maybe i can find one at a decent cost.
regards

FD,
Powered by tractor fuel

barrote

03-05-2015, 05:54 PM #5

hargg ,
u´re too far , shipping it to germany is really expensive . i can check though , 50 € euro for me and shiping on u. the pulley u want is a stock puley or something exotic? maybe i can find one at a decent cost.
regards

FD,
Powered by tractor fuel

Holset

420

03-06-2015, 02:20 AM #6

The pulley is smaler diameter, I think mostly used on 3.5l engine and OM606 Turbo.

____________________________________

'88 300CD Turbo Coupé - OM603

DiseaselWeasel

03-06-2015, 02:20 AM #6

The pulley is smaler diameter, I think mostly used on 3.5l engine and OM606 Turbo.

____________________________________

'88 300CD Turbo Coupé - OM603

View a Printable Version

0 Vote(s) - 0 Average

Users browsing this thread:
2 Guest(s)

Users browsing this thread:
2 Guest(s)