617-95X wagon exhaust - build your own?

STD Tuning Engine 617-95X wagon exhaust - build your own?

617-95X wagon exhaust - build your own?

617-95X wagon exhaust - build your own?

View a Printable Version

0 Vote(s) - 0 Average

MTUPower

looking for more power on a daily driver

288

03-03-2018, 03:55 PM #1

Who has built their own exhaust for a w123? I want to go bigger- 3 inch. Please advise!

2005 CDI heavily modified 1984 300TD - Myna pump/TMIC/enlarged PC's/HX30Super/W126 II front brakes/Vogtland springs/EGT +Boost gauges/H4 Hella's

MTUPower

03-03-2018, 03:55 PM #1

Who has built their own exhaust for a w123? I want to go bigger- 3 inch. Please advise!

2005 CDI heavily modified 1984 300TD - Myna pump/TMIC/enlarged PC's/HX30Super/W126 II front brakes/Vogtland springs/EGT +Boost gauges/H4 Hella's

K26-2

38

03-03-2018, 06:44 PM #2

I did mine all in stainless steel sanitary pipe, in 2 1/2". Went from the header pipe back, with a home made resonator. I took the old exhaust off and laid it out and copied it with the stainless. A chop saw and tig welder work great, but a mig welder can also be used. You could do regular steel in 3" by using the old ends and copying the pattern. Pm me if you want pics.

fordheaded

03-03-2018, 06:44 PM #2

I did mine all in stainless steel sanitary pipe, in 2 1/2". Went from the header pipe back, with a home made resonator. I took the old exhaust off and laid it out and copied it with the stainless. A chop saw and tig welder work great, but a mig welder can also be used. You could do regular steel in 3" by using the old ends and copying the pattern. Pm me if you want pics.

MTUPower

looking for more power on a daily driver

288

03-03-2018, 07:05 PM #3

I just googled stainless steel sanitary pipe and am looking over the selection of providers. I'm not a welder- but my neighbor might be able to help. please send pics of what you did. I'd like to go with 3 inch. Explain how you made a resonator. thx!

2005 CDI heavily modified 1984 300TD - Myna pump/TMIC/enlarged PC's/HX30Super/W126 II front brakes/Vogtland springs/EGT +Boost gauges/H4 Hella's

MTUPower

03-03-2018, 07:05 PM #3

I just googled stainless steel sanitary pipe and am looking over the selection of providers. I'm not a welder- but my neighbor might be able to help. please send pics of what you did. I'd like to go with 3 inch. Explain how you made a resonator. thx!

2005 CDI heavily modified 1984 300TD - Myna pump/TMIC/enlarged PC's/HX30Super/W126 II front brakes/Vogtland springs/EGT +Boost gauges/H4 Hella's

K26-2

38

03-03-2018, 07:19 PM #4

check your pms'

fordheaded

03-03-2018, 07:19 PM #4

check your pms'

View a Printable Version

0 Vote(s) - 0 Average

Users browsing this thread:
1 Guest(s)

Users browsing this thread:
1 Guest(s)