OM606 (WILL IT FIT)
OM606 (WILL IT FIT)
Modstop
Unregistered
09-25-2020, 06:07 AM
#1
My Names Matt and I'm currently looking at swapping an OM606 into either as IS300 or a GS300 to use as my Business's Promotional vehicle
Iknow aftermarket support is a lot better for the is300's but i was wondering if anyone had attempted this swap before and could share some knowledge on it?
I have a feeling things like diff's and driveshafts may be an issue considering my power and torque goals :/
Any advice or help is appreciated
And open to more suggestions on cars to swap the 606 into
Thanks
Modstop
Modstop
09-25-2020, 06:07 AM #1Good Morning All,
My Names Matt and I'm currently looking at swapping an OM606 into either as IS300 or a GS300 to use as my Business's Promotional vehicle
Iknow aftermarket support is a lot better for the is300's but i was wondering if anyone had attempted this swap before and could share some knowledge on it?
I have a feeling things like diff's and driveshafts may be an issue considering my power and torque goals :/
Any advice or help is appreciated
And open to more suggestions on cars to swap the 606 into
Thanks
Modstop
09-28-2020, 02:52 AM
#2
1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km
1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD
http://www.superturbodiesel.com/std/show...p?tid=6208
1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km
1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)