building a drift car! - Printable Version +- STD (https://www.superturbodiesel.com/std) +-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6) +--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7) +--- Thread: building a drift car! (/showthread.php?tid=3612) |
building a drift car! - eamonn - 05-06-2012 hi, this is my first post here so bare with me! i want to build a diesel drift car just for a challenge and for something a bit different! i ha ve plenty of experience with petrol but diesel tuning is completely new to me but im looking forward to the chaallenge. this is what i have to work with: w210 e300 turbo diesel, 98 model with the om606 engine im looking to get 350-400 horse power from it but im looking for advice on what turbo to use, IP, intercooler etc. and any other modifications needed. i have a guy who can fabricate custom manifolds etc for me too, i want to get the engine where i want it first and then worry about drivetrain and suspension any input at all would be great as im a complete newbie to diesel tuning! RE: building a drift car! - bad3gakk - 05-06-2012 Throw the IP in the nearest bin, and replace it with a modded IP from a om603... Figure out how U want to supply it with enough air to burn all the diesel.. Supercharger and a large turbo combo seems to be a good way to do this in the drifting world Custom exhaust manifold will be needed Large intercooler too RE: building a drift car! - eamonn - 05-06-2012 (05-06-2012, 08:15 AM)bad3gakk Throw the IP in the nearest bin, and replace it with a modded IP from a om603... thanks for the reply! i think ill be fine with just a turbo for now, from what i can figure out a holset hx35 would be my best option maybe? i should be able to get my hands on an om603 IP easy enough but where do i send it to get it modified? thanks RE: building a drift car! - bad3gakk - 05-06-2012 I reccomend www.herlevi.fi, contact these guys, you'll probably wount find a better bang for the buck, and they make a hell of a bang A 603 IP shouldt be too hard to find from a scrapyard.. But herlevi might have one too... RE: building a drift car! - eamonn - 05-06-2012 (05-06-2012, 01:46 PM)bad3gakk I reccomend www.herlevi.fi, contact these guys, you'll probably wount find a better bang for the buck, and they make a hell of a bang thanks for that, how do you rate the hx35 turbo? what boost would i be running and wht rpm do you think it would start pulling at? RE: building a drift car! - mantahead - 05-07-2012 (05-06-2012, 01:54 PM)eamonnhi,(05-06-2012, 01:46 PM)bad3gakk I reccomend www.herlevi.fi, contact these guys, you'll probably wount find a better bang for the buck, and they make a hell of a bang they have quite a bit of lag, small housing will help. this is om605 with Dieselmeken pump, this will work better with custom exhaust manifold. here is drift video. http://youtu.be/bMhdp_c4c5w |