racing camshafts for om606 - Printable Version

racing camshafts for om606 - Printable Version

+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: racing camshafts for om606 (/showthread.php?tid=4130)

racing camshafts for om606 - m2rkz - 11-28-2012

Where do buy racing camshafts for om606 with good price?

RE: racing camshafts for om606 - EDH_Performance - 11-28-2012

(11-28-2012, 02:30 PM)m2rkz Where do buy racing camshafts for om606 with good price?

kmcams.com regrinds to your spesifications Wink

RE: racing camshafts for om606 - artuur - 11-28-2012

(11-28-2012, 02:47 PM)EDH_Performance
(11-28-2012, 02:30 PM)m2rkz Where do buy racing camshafts for om606 with good price?

kmcams.com regrinds to your spesifications

I asked from kmcams.com
hopefully we get asnswer tomorrow.
Artur

RE: racing camshafts for om606 - EDH_Performance - 11-28-2012

(11-28-2012, 02:58 PM)artuur
(11-28-2012, 02:47 PM)EDH_Performance
(11-28-2012, 02:30 PM)m2rkz Where do buy racing camshafts for om606 with good price?

kmcams.com regrinds to your spesifications

I asked from kmcams.com
hopefully we get asnswer tomorrow.
Artur

They are a really good and serious company! Have bought many camshafts from them, and they are gonna make me some racing camshafts for my engine Wink

They also sells bolt on valvesprings that can handle up to 8000rpm! I have the springs in my engine Wink

RE: racing camshafts for om606 - artuur - 11-28-2012

(11-28-2012, 03:01 PM)EDH_Performance
(11-28-2012, 02:58 PM)artuur
(11-28-2012, 02:47 PM)EDH_Performance kmcams.com regrinds to your spesifications

I asked from kmcams.com
hopefully we get asnswer tomorrow.
Artur

They are a really good and serious company! Have bought many camshafts from them, and they are gonna make me some racing camshafts for my engine They also sells bolt on valvesprings that can handle up to 8000rpm! I have the springs in my engine

ok
question about the valve spring shims ?
the original ones dont fit with new springs ? what needs do be done with new shims?
The valves will be ordered next week Smile

RE: racing camshafts for om606 - EDH_Performance - 11-28-2012

As you now, the stock springs is wider in the botom than the top...
the race springs is not so wide in the botom as the stock ones, so the spring won`t fit on the stock bottom shims!
So you need to make a flat shims, as thin as you can find! I used some washer, for bolts/nuts (local hardwear store). I used some washer that was about 1.5mm thick, and abit bigger diameter than the springs...I had to drill the senter hole a bit bigger to go over the valvestem seal Wink

Easy fix!
Look at the pictures in my project thread Wink

RE: racing camshafts for om606 - mantahead - 11-28-2012

(11-28-2012, 02:47 PM)EDH_Performance
(11-28-2012, 02:30 PM)m2rkz Where do buy racing camshafts for om606 with good price?

kmcams.com regrinds to your spesifications

hi,
anyone worked out how much more lift is needed when getting om606 cams reprofiled for more rpm?
Edh Performance, is the n/a intake cam no good for high rpm?

RE: racing camshafts for om606 - EDH_Performance - 11-29-2012

(11-28-2012, 07:37 PM)mantahead
(11-28-2012, 02:47 PM)EDH_Performance
(11-28-2012, 02:30 PM)m2rkz Where do buy racing camshafts for om606 with good price?

kmcams.com regrinds to your spesifications
hi,
anyone worked out how much more lift is needed when getting om606 cams reprofiled for more rpm?
Edh Performance, is the n/a intake cam no good for high rpm?

I dont know, mine revs to 6100rpm...N/A shafts works good, but for extreme power you need to look at some performance shafts Big Grin