STD
OM605 manual pump + oil cooler - Printable Version

+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: OM605 manual pump + oil cooler (/showthread.php?tid=7427)

OM605 manual pump + oil cooler - Nev - 09-22-2016

Good evening, this is my first post so hello everyone! 

I'm building a W124 with a 605 at the moment and i've got a question about oil coolers. I'm using a KKK turbo from an E300 so i'm not going to be making huge power. Obviously the 605 comes with the oil/water cooler, but with the manual pump on this won't fit. I have a 606 n/a oil filter housing which does fit but this means I don't have an oil cooler.

What is the best way to get round this? So far i have 3 options; 
  • 606 n/a housing and no cooler (probably overheat the oil)
  • 605 housing with fittings welded on in place of the standard oil/water cooler (with there being no thermostat on it, could this cause warm up issues with the oil?)
  • Make a sandwich plate, remote oil filter and cooler (pain in the a*se)
any other suggestions? Here's a photo of my car and the engine before i put it in yesterday! 

[Image: 14359080_10157338011295276_3162859479113...e=5885C2F8]

Thanks!

RE: OM605 manual pump + oil cooler - Mallinman - 09-23-2016

Is it a dieselmeken pump you've got on?? Cos that's what I've put in mine and the oil/water cooler has fit on.

RE: OM605 manual pump + oil cooler - Nev - 09-23-2016

Its from Luke at DieselPumpUK. If I took the rear module off it and made a plate it would fit, but as it is it doesn't.

RE: OM605 manual pump + oil cooler - Mallinman - 09-23-2016

(09-23-2016, 01:38 AM)Nev Its from Luke at DieselPumpUK. If I took the rear module off it and made a plate it would fit, but as it is it doesn't.

Yea mines from Luke. But it does fit. Well it's all in anyway. It is close tho. Il take a pic.

RE: OM605 manual pump + oil cooler - Mallinman - 09-23-2016

Ok I can't figure out how to put a pic up. I could what's app it to u if u gave me ur number.

RE: OM605 manual pump + oil cooler - barrote - 09-24-2016

Search for the part # A606 180 03 34 , attaches to the filter with the proper hose connections. Compatible with filter supports in any MB with the cooler.
regards

RE: OM605 manual pump + oil cooler - Hario' - 11-02-2016

(09-23-2016, 01:38 AM)Nev Its from Luke at DieselPumpUK. If I took the rear module off it and made a plate it would fit, but as it is it doesn't.

606.962 filter housing with remote oil cooler take off already built in?