STD Tuning Engine Experiences with DPUK fuel pump building kit?

Experiences with DPUK fuel pump building kit?

Experiences with DPUK fuel pump building kit?

 
  • 0 Vote(s) - 0 Average
 
Enis13
Naturally-aspirated

8
05-12-2021, 04:17 PM #1
Hi, was wondering has anybody got any experience with this kit? I got a few reliable builders and with this pump would be A LOT cheaper. Are there more kits like this from other companies? Hows the performance and what's the difference in price from other companies? Thank you! Big Grin Big Grin
Enis13
05-12-2021, 04:17 PM #1

Hi, was wondering has anybody got any experience with this kit? I got a few reliable builders and with this pump would be A LOT cheaper. Are there more kits like this from other companies? Hows the performance and what's the difference in price from other companies? Thank you! Big Grin Big Grin

AlanMcR
mind - blown

400
05-12-2021, 11:18 PM #2
(05-12-2021, 04:17 PM)Enis13 Hi, was wondering has anybody got any experience with this kit? I got a few reliable builders and with this pump would be A LOT cheaper. Are there more kits like this from other companies? Hows the performance and what's the difference in price from other companies? Thank you! Big Grin Big Grin
I would presume that you need an injection pump test bench to make any use of the kit.
AlanMcR
05-12-2021, 11:18 PM #2

(05-12-2021, 04:17 PM)Enis13 Hi, was wondering has anybody got any experience with this kit? I got a few reliable builders and with this pump would be A LOT cheaper. Are there more kits like this from other companies? Hows the performance and what's the difference in price from other companies? Thank you! Big Grin Big Grin
I would presume that you need an injection pump test bench to make any use of the kit.

barrote
Superturbo

1,627
05-13-2021, 03:21 AM #3
Wich kit are u guys talking about?

FD,
Powered by tractor fuel
barrote
05-13-2021, 03:21 AM #3

Wich kit are u guys talking about?


FD,
Powered by tractor fuel

German Diesel
K26-2

42
05-13-2021, 11:26 AM #4
Hi,

i have tested the Pumpelements, and i am not very happy with it. 
You have to spend a lot of work on the testbench, and it runs never like you really want.


The fabrication tolerances are too big, maybe the elements can work, when you have 100 pieces and you put each one in the pump, take it out and put it in catagories. So you have some of type a, type b and so on. With this system maybe it can work, but then, the engine runs bad too.


Because this, i have choosen my own way, I grind my own Pumpelements in 2 different diameters, so i know what i have....


Best regards from Germany
[url=https://dict.leo.org/englisch-deutsch/TECH.][/url]
German Diesel
05-13-2021, 11:26 AM #4

Hi,

i have tested the Pumpelements, and i am not very happy with it. 
You have to spend a lot of work on the testbench, and it runs never like you really want.


The fabrication tolerances are too big, maybe the elements can work, when you have 100 pieces and you put each one in the pump, take it out and put it in catagories. So you have some of type a, type b and so on. With this system maybe it can work, but then, the engine runs bad too.


Because this, i have choosen my own way, I grind my own Pumpelements in 2 different diameters, so i know what i have....


Best regards from Germany
[url=https://dict.leo.org/englisch-deutsch/TECH.][/url]

Enis13
Naturally-aspirated

8
05-13-2021, 03:18 PM #5
(05-13-2021, 03:21 AM)barrote Wich kit are u guys talking about?
This one.
https://www.dieselpumpuk.com/shop/fuel-p...lding-kit/
Enis13
05-13-2021, 03:18 PM #5

(05-13-2021, 03:21 AM)barrote Wich kit are u guys talking about?
This one.
https://www.dieselpumpuk.com/shop/fuel-p...lding-kit/

Enis13
Naturally-aspirated

8
05-13-2021, 03:19 PM #6
(05-13-2021, 11:26 AM)German Diesel Hi,

i have tested the Pumpelements, and i am not very happy with it. 
You have to spend a lot of work on the testbench, and it runs never like you really want.


The fabrication tolerances are too big, maybe the elements can work, when you have 100 pieces and you put each one in the pump, take it out and put it in catagories. So you have some of type a, type b and so on. With this system maybe it can work, but then, the engine runs bad too.


Because this, i have choosen my own way, I grind my own Pumpelements in 2 different diameters, so i know what i have....


Best regards from Germany
[url=https://dict.leo.org/englisch-deutsch/TECH.][/url]
Is anybody else doing these kits that are good? And thank you for the info!
Enis13
05-13-2021, 03:19 PM #6

(05-13-2021, 11:26 AM)German Diesel Hi,

i have tested the Pumpelements, and i am not very happy with it. 
You have to spend a lot of work on the testbench, and it runs never like you really want.


The fabrication tolerances are too big, maybe the elements can work, when you have 100 pieces and you put each one in the pump, take it out and put it in catagories. So you have some of type a, type b and so on. With this system maybe it can work, but then, the engine runs bad too.


Because this, i have choosen my own way, I grind my own Pumpelements in 2 different diameters, so i know what i have....


Best regards from Germany
[url=https://dict.leo.org/englisch-deutsch/TECH.][/url]
Is anybody else doing these kits that are good? And thank you for the info!

barrote
Superturbo

1,627
05-14-2021, 03:22 AM #7
DPUK is a crap fella , and all he sells is crap too.
But many people buy from him, probably they like to be fooled.
The level of expertise needed to calibrate and tune a superpump is not at the corner , neither at the reach of all.
This just to forguet that special tooling needed.
I have tuned a few pumps and seen a few things ...
Like repairing DPUK pumps and find out DMK 1st series elements in them.
Dadad....

FD,
Powered by tractor fuel
barrote
05-14-2021, 03:22 AM #7

DPUK is a crap fella , and all he sells is crap too.
But many people buy from him, probably they like to be fooled.
The level of expertise needed to calibrate and tune a superpump is not at the corner , neither at the reach of all.
This just to forguet that special tooling needed.
I have tuned a few pumps and seen a few things ...
Like repairing DPUK pumps and find out DMK 1st series elements in them.
Dadad....


FD,
Powered by tractor fuel

dieseltorque
K26-2

25
05-14-2021, 05:53 AM #8
I've done those elements on my 605edc pump . I've set high cc fueling as much as possible equal leaving idle as it is, 3 elements gave about equal , 4th higher and 5th less, so engine feels a bit shaky on idle. As German Diesel mentined you have to have many sets to find equal elements. If its just budget tuning then it can work as it is.
dieseltorque
05-14-2021, 05:53 AM #8

I've done those elements on my 605edc pump . I've set high cc fueling as much as possible equal leaving idle as it is, 3 elements gave about equal , 4th higher and 5th less, so engine feels a bit shaky on idle. As German Diesel mentined you have to have many sets to find equal elements. If its just budget tuning then it can work as it is.

X Double Dot
GTA2056V

90
05-14-2021, 07:28 AM #9
(05-14-2021, 03:22 AM)barrote DPUK is a crap fella , and all he sells is crap too.
But many people buy from him, probably they like to be fooled.
The level of expertise needed to calibrate and tune a superpump is not at the corner , neither at the reach of all.
This just to forguet that special tooling needed.
I have tuned a few pumps and seen a few things ...
Like repairing DPUK pumps and find out DMK 1st series elements in them.
Dadad....

you think thats true for all his stuff (non pump related)? his youtube videos going through the products seem to show he's not just slappin stuff together, theres some thought and organization going on.  Seems like he's more organized than his competitors i've seen
X Double Dot
05-14-2021, 07:28 AM #9

(05-14-2021, 03:22 AM)barrote DPUK is a crap fella , and all he sells is crap too.
But many people buy from him, probably they like to be fooled.
The level of expertise needed to calibrate and tune a superpump is not at the corner , neither at the reach of all.
This just to forguet that special tooling needed.
I have tuned a few pumps and seen a few things ...
Like repairing DPUK pumps and find out DMK 1st series elements in them.
Dadad....

you think thats true for all his stuff (non pump related)? his youtube videos going through the products seem to show he's not just slappin stuff together, theres some thought and organization going on.  Seems like he's more organized than his competitors i've seen

zeeman
Holset

444
05-14-2021, 10:39 AM #10
(05-14-2021, 07:28 AM)X Double Dot
(05-14-2021, 03:22 AM)barrote DPUK is a crap fella , and all he sells is crap too.
But many people buy from him, probably they like to be fooled.
The level of expertise needed to calibrate and tune a superpump is not at the corner , neither at the reach of all.
This just to forguet that special tooling needed.
I have tuned a few pumps and seen a few things ...
Like repairing DPUK pumps and find out DMK 1st series elements in them.
Dadad....

you think thats true for all his stuff (non pump related)? his youtube videos going through the products seem to show he's not just slappin stuff together, theres some thought and organization going on.  Seems like he's more organized than his competitors i've seen
I have to agree, I have dealt with Luke at DieselpumpUK for some time. He is a great guy and very helpful with questions. He makes some outstanding products and is always coming up with new ones. As was stated he does have some very informative videos and really does know his stuff.
zeeman
05-14-2021, 10:39 AM #10

(05-14-2021, 07:28 AM)X Double Dot
(05-14-2021, 03:22 AM)barrote DPUK is a crap fella , and all he sells is crap too.
But many people buy from him, probably they like to be fooled.
The level of expertise needed to calibrate and tune a superpump is not at the corner , neither at the reach of all.
This just to forguet that special tooling needed.
I have tuned a few pumps and seen a few things ...
Like repairing DPUK pumps and find out DMK 1st series elements in them.
Dadad....

you think thats true for all his stuff (non pump related)? his youtube videos going through the products seem to show he's not just slappin stuff together, theres some thought and organization going on.  Seems like he's more organized than his competitors i've seen
I have to agree, I have dealt with Luke at DieselpumpUK for some time. He is a great guy and very helpful with questions. He makes some outstanding products and is always coming up with new ones. As was stated he does have some very informative videos and really does know his stuff.

German Diesel
K26-2

42
05-14-2021, 12:14 PM #11
HI


@barotte
Thanks, i dont want to write it so hard, but you are right, DPUK and his products are crap!

@all
by the way, new, outstanding products? 
NO! 
Pumpelements from Diesel Meken
Throttle Cable holder from Germany
and so on...


and the clutch adapters, this is not much work.




And for the latest video
https://www.youtube.com/watch?v=nKkWtXhvKeE&t=465s

he does not tell the truth, but maybe he doesnt know the truth. Because, in many videos, you can see the ignorance......

The Cast iron of the Crankhousing is an other,
The Crankshaft, the camshafts too (not just the cam, also the Material)
The Rods, Pistons ect.


I know the OM606 until the last screw or spring. I know the Real differents of this enginens.....

My 3.5 Liter OM606 with 9mm Pump elements
https://youtu.be/cLzINPupVMk
https://youtu.be/jJvytElw8TE
German Diesel
05-14-2021, 12:14 PM #11

HI


@barotte
Thanks, i dont want to write it so hard, but you are right, DPUK and his products are crap!

@all
by the way, new, outstanding products? 
NO! 
Pumpelements from Diesel Meken
Throttle Cable holder from Germany
and so on...


and the clutch adapters, this is not much work.




And for the latest video
https://www.youtube.com/watch?v=nKkWtXhvKeE&t=465s

he does not tell the truth, but maybe he doesnt know the truth. Because, in many videos, you can see the ignorance......

The Cast iron of the Crankhousing is an other,
The Crankshaft, the camshafts too (not just the cam, also the Material)
The Rods, Pistons ect.


I know the OM606 until the last screw or spring. I know the Real differents of this enginens.....

My 3.5 Liter OM606 with 9mm Pump elements
https://youtu.be/cLzINPupVMk
https://youtu.be/jJvytElw8TE

Enis13
Naturally-aspirated

8
05-14-2021, 04:59 PM #12
So does anybody else do these kinds of kits, elements, etc.? Would prefer to do this instead of buying a whole new pump.

And btw thank you everyone for helping this newbie!
Enis13
05-14-2021, 04:59 PM #12

So does anybody else do these kinds of kits, elements, etc.? Would prefer to do this instead of buying a whole new pump.

And btw thank you everyone for helping this newbie!

zeeman
Holset

444
05-14-2021, 07:45 PM #13
(05-14-2021, 12:14 PM)German Diesel HI


@barotte
Thanks, i dont want to write it so hard, but you are right, DPUK and his products are crap!

@all
by the way, new, outstanding products? 
NO! 
Pumpelements from Diesel Meken
Throttle Cable holder from Germany
and so on...


and the clutch adapters, this is not much work.




And for the latest video
https://www.youtube.com/watch?v=nKkWtXhvKeE&t=465s

he does not tell the truth, but maybe he doesnt know the truth. Because, in many videos, you can see the ignorance......

The Cast iron of the Crankhousing is an other,
The Crankshaft, the camshafts too (not just the cam, also the Material)
The Rods, Pistons ect.


I know the OM606 until the last screw or spring. I know the Real differents of this enginens.....

My 3.5 Liter OM606 with 9mm Pump elements
https://youtu.be/cLzINPupVMk
https://youtu.be/jJvytElw8TE
I think the one who is showing their ignorance is yourself.  Enough said.
zeeman
05-14-2021, 07:45 PM #13

(05-14-2021, 12:14 PM)German Diesel HI


@barotte
Thanks, i dont want to write it so hard, but you are right, DPUK and his products are crap!

@all
by the way, new, outstanding products? 
NO! 
Pumpelements from Diesel Meken
Throttle Cable holder from Germany
and so on...


and the clutch adapters, this is not much work.




And for the latest video
https://www.youtube.com/watch?v=nKkWtXhvKeE&t=465s

he does not tell the truth, but maybe he doesnt know the truth. Because, in many videos, you can see the ignorance......

The Cast iron of the Crankhousing is an other,
The Crankshaft, the camshafts too (not just the cam, also the Material)
The Rods, Pistons ect.


I know the OM606 until the last screw or spring. I know the Real differents of this enginens.....

My 3.5 Liter OM606 with 9mm Pump elements
https://youtu.be/cLzINPupVMk
https://youtu.be/jJvytElw8TE
I think the one who is showing their ignorance is yourself.  Enough said.

German Diesel
K26-2

42
05-14-2021, 10:44 PM #14
(05-14-2021, 07:45 PM)zeeman
(05-14-2021, 12:14 PM)German Diesel HI


@barotte
Thanks, i dont want to write it so hard, but you are right, DPUK and his products are crap!

@all
by the way, new, outstanding products? 
NO! 
Pumpelements from Diesel Meken
Throttle Cable holder from Germany
and so on...


and the clutch adapters, this is not much work.




And for the latest video
https://www.youtube.com/watch?v=nKkWtXhvKeE&t=465s

he does not tell the truth, but maybe he doesnt know the truth. Because, in many videos, you can see the ignorance......

The Cast iron of the Crankhousing is an other,
The Crankshaft, the camshafts too (not just the cam, also the Material)
The Rods, Pistons ect.


I know the OM606 until the last screw or spring. I know the Real differents of this enginens.....

My 3.5 Liter OM606 with 9mm Pump elements
https://youtu.be/cLzINPupVMk
https://youtu.be/jJvytElw8TE
I think the one who is showing their ignorance is yourself.  Enough said.
Hi, maybe for you it looks so, then i want to respect it. But i know what i Do. Best regards
German Diesel
05-14-2021, 10:44 PM #14

(05-14-2021, 07:45 PM)zeeman
(05-14-2021, 12:14 PM)German Diesel HI


@barotte
Thanks, i dont want to write it so hard, but you are right, DPUK and his products are crap!

@all
by the way, new, outstanding products? 
NO! 
Pumpelements from Diesel Meken
Throttle Cable holder from Germany
and so on...


and the clutch adapters, this is not much work.




And for the latest video
https://www.youtube.com/watch?v=nKkWtXhvKeE&t=465s

he does not tell the truth, but maybe he doesnt know the truth. Because, in many videos, you can see the ignorance......

The Cast iron of the Crankhousing is an other,
The Crankshaft, the camshafts too (not just the cam, also the Material)
The Rods, Pistons ect.


I know the OM606 until the last screw or spring. I know the Real differents of this enginens.....

My 3.5 Liter OM606 with 9mm Pump elements
https://youtu.be/cLzINPupVMk
https://youtu.be/jJvytElw8TE
I think the one who is showing their ignorance is yourself.  Enough said.
Hi, maybe for you it looks so, then i want to respect it. But i know what i Do. Best regards

barrote
Superturbo

1,627
05-15-2021, 02:53 PM #15
Luke's suporters...
Trick's of the trade...
Thats cause of him, and orhers alike, that WE do not share more info.
But if anyone thinks a pump (any kind) can be assembled without a tester, and years of expertise... i don't mind some will come to me for rebuild... or others.
Good luck

FD,
Powered by tractor fuel
barrote
05-15-2021, 02:53 PM #15

Luke's suporters...
Trick's of the trade...
Thats cause of him, and orhers alike, that WE do not share more info.
But if anyone thinks a pump (any kind) can be assembled without a tester, and years of expertise... i don't mind some will come to me for rebuild... or others.
Good luck


FD,
Powered by tractor fuel

German Diesel
K26-2

42
05-16-2021, 08:55 AM #16
(05-15-2021, 02:53 PM)barrote Luke's suporters...
Trick's of the trade...
Thats cause of him, and orhers alike, that WE do not share more info.
But if anyone thinks a pump (any kind) can be assembled without a tester, and years of expertise... i don't mind some will come to me for rebuild... or others.
Good luck
Also my opinon...
German Diesel
05-16-2021, 08:55 AM #16

(05-15-2021, 02:53 PM)barrote Luke's suporters...
Trick's of the trade...
Thats cause of him, and orhers alike, that WE do not share more info.
But if anyone thinks a pump (any kind) can be assembled without a tester, and years of expertise... i don't mind some will come to me for rebuild... or others.
Good luck
Also my opinon...

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 5 Guest(s)
Users browsing this thread:
 5 Guest(s)