+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Suspension (https://www.superturbodiesel.com/std/forumdisplay.php?fid=5)
+--- Thread: advice please. (/showthread.php?tid=1259)
advice please. - Jtn190D - 04-05-2010
Hey guys,
i am able to get some suspension parts from a 400E what ones should i get that will fit on my 190d and how much should they cost?
Thanks a lot!
Justin.
RE: advice please. - Kozuka - 04-05-2010
Front and rear springs can be used as long as they are not SLS, also the front sway bar can be used if you trim it and use the 400E's brackets & bolts. Apart from hub's and brakes I can't think of anything else ( not really suspension ). Not sure on control arms.
Junkyards
Springs $50 each
Sway Bar $75-$125 /w Brackets ( should buy new bushings )
RE: advice please. - Jtn190D - 04-07-2010
Why should i get the sway bar from the 400E? is there something different then the one on my 190D?
Thanks!
Justin.
RE: advice please. - Kozuka - 04-07-2010
(04-07-2010, 06:56 AM)Jtn190D Why should i get the sway bar from the 400E? is there something different then the one on my 190D?
Thanks!
Justin.
Thicker, offers more stiffness in the front end and makes the suspension more suitable for a heavier engine.