STD
Can I adjust the idle higher on a w116 300sd? - Printable Version

+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Maintenance (https://www.superturbodiesel.com/std/forumdisplay.php?fid=22)
+--- Forum: General (https://www.superturbodiesel.com/std/forumdisplay.php?fid=4)
+--- Thread: Can I adjust the idle higher on a w116 300sd? (/showthread.php?tid=2304)



Can I adjust the idle higher on a w116 300sd? - W116Lorinser - 02-23-2011

i just wanted to know if it was possible to adjust the idle slightly higher on a w116 300sd turbo diesel om617.


thanks


RE: Can I adjust the idle higher on a w116 300sd? - winmutt - 02-23-2011

Yes. There is a long nut looking thing on the IP.


RE: Can I adjust the idle higher on a w116 300sd? - W116Lorinser - 02-24-2011

where exaclty is that nut? im going to check first thing tommorrow morning and adjust.

any diagram or picture of the IP and location of idle adjustment?


thanks guysSmile



RE: Can I adjust the idle higher on a w116 300sd? - winmutt - 02-24-2011

Just look with a light. its like a 1" long nut.


RE: Can I adjust the idle higher on a w116 300sd? - Captain America - 02-24-2011

(02-24-2011, 02:05 PM)winmutt Just look with a light. its like a 1" long nut.

You talking about the rack damper?


RE: Can I adjust the idle higher on a w116 300sd? - ForcedInduction - 02-24-2011

Its on the engine side of the injection pump. 14mm lock nut and flatblade screwdriver to adjust. Do not over tighten or you can break off the mount like on this pump.


RE: Can I adjust the idle higher on a w116 300sd? - W116Lorinser - 02-24-2011

(02-24-2011, 04:05 PM)Captain America
(02-24-2011, 02:05 PM)winmutt Just look with a light. its like a 1" long nut.

You talking about the rack damper?



Someone confirm all this please before i start touching the IP which is something i dont wanna mess with.



RE: Can I adjust the idle higher on a w116 300sd? - garage - 02-26-2011

(02-24-2011, 06:23 PM)W116Lorinser
(02-24-2011, 04:05 PM)Captain America
(02-24-2011, 02:05 PM)winmutt Just look with a light. its like a 1" long nut.

You talking about the rack damper?



Someone confirm all this please before i start touching the IP which is something i dont wanna mess with.

Forced showed you in the picture, its the same piece. Except in the picture its just broken off.