oil cooler lines - Printable Version

oil cooler lines - Printable Version

+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: oil cooler lines (/showthread.php?tid=3501)

oil cooler lines - oldtown - 04-03-2012

any idea where i can get these with spending 250$ +

RE: oil cooler lines - serverman777 - 04-03-2012

http://www.google.com/products/catalog?q=stainless+steel+oil+lines&surl=1&safe=active&um=1&ie=UTF-8&tbm=shop&cid=2504251967393803569&sa=X&ei=nUF7T7bABqbq0gHGmeCMBg&ved=0CFoQ8wIwAA

RE: oil cooler lines - willbhere4u - 04-03-2012

partsgeek.com

RE: oil cooler lines - oldtown - 04-03-2012

(04-03-2012, 01:30 PM)serverman777 http://www.google.com/products/catalog?q=stainless+steel+oil+lines&surl=1&safe=active&um=1&ie=UTF-8&tbm=shop&cid=2504251967393803569&sa=X&ei=nUF7T7bABqbq0gHGmeCMBg&ved=0CFoQ8wIwAA

sweet thanks. obviously these dont look anything like stock. do you need some sort of adapters? can they handle the volume of oil?

(04-03-2012, 01:33 PM)willbhere4u partsgeek.com

i check PG, i was not sure about them not being OEM.

RE: oil cooler lines - Simpler=Better - 04-03-2012

Are the metal parts damaged or just the rubber? You can carefully dremel off the rubber lines and replace them with regular hydraulic hose from NAPA.

RE: oil cooler lines - oldtown - 04-03-2012

(04-03-2012, 01:41 PM)Simpler=Better Are the metal parts damaged or just the rubber? You can carefully dremel off the rubber lines and replace them with regular hydraulic hose from NAPA.

these are starting to leak where the rubber meets the metal. not sure i am confident retrofitting the hydraulic lines.

RE: oil cooler lines - Simpler=Better - 04-03-2012

Take a look see here:

http://www.peachparts.com/shopforum/diesel-discussion/205012-cheap-oil-cooler-hose-replacement-3.html

[Image: 1.jpg]

RE: oil cooler lines - serverman777 - 04-03-2012

You and get nippes to screw into your oil filter house thing that you can pair up those lines with. I would get bigger lines than stock. bigger lines bigger flow