+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Drivetrain (https://www.superturbodiesel.com/std/forumdisplay.php?fid=9)
+--- Thread: 1985 california tach??? (/showthread.php?tid=3524)
1985 california tach??? - willbhere4u - 04-09-2012
I picked up a tachometer off a 1985 300d turbo California model it had the normal crank balance pick up sensor but the amplifier is smaller and has nothing under the cap???? I also garbed the tach what do i need to do to hook it up???
I've already mounted the sensor and ran the cable to the amp port and mounted the gauge in the cluster I need to hook up from the ?amp? to the tach
RE: 1985 california tach??? - willbhere4u - 04-09-2012
looks like the 1985 tach used a different sensor in the trans! But the crank sensor and amp base should still work! looks like I will need to find a tach amp now
RE: 1985 california tach??? - led-panzer - 04-09-2012
Yea the 85 Cali has a retarded tach setup, sensor on the trans, goes through the EGR computer ect ect
RE: 1985 california tach??? - willbhere4u - 04-09-2012
Well I also have a tachometer from an 1982 300d so I can use that the balance sensor I pulled from that 1985 cali looks like a normal and same for the amp base I hope I can use them