+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: om601 injection pump and ALDA (/showthread.php?tid=3647)
om601 injection pump and ALDA - starykot - 05-15-2012
Does anyone considered the possibility of mounting ALDA in the injection pump motor om601? A friend says that it can be done in a series injection pump. I, however, that the best solution would be to install the injection pump with a Mercedes Vito 2.3.
In general, whether it was a completed project om601 turbo in a forum? Somehow I can not find anything.
RE: om601 injection pump and ALDA - pp d - 05-16-2012
It is possible to build the ALDA to it.
You can take off the ADA and put ALDA to it´s place.
RE: om601 injection pump and ALDA - starykot - 05-16-2012
And what if the pump had no pre-ADA?
RE: om601 injection pump and ALDA - tomnik - 05-17-2012
Hi,
change the entire governor.
Tom
(05-16-2012, 11:03 AM)starykot And what if the pump had no pre-ADA?
RE: om601 injection pump and ALDA - starykot - 05-20-2012
Which injection pump / motor to look for Alda?
RE: om601 injection pump and ALDA - tomnik - 05-20-2012
any M-pump for turbo.
Vito 2.3 Turbodiesel
124 all turbos
You could also use the n/a governor and get an external "ALDA" .
Tom
(05-20-2012, 06:58 AM)starykot Which injection pump / motor to look for Alda?
RE: om601 injection pump and ALDA - starykot - 05-31-2012
I got the injection pump with the valve ADA.
Would not it be possible to rewrite the ADA at ALDA by appropriate calibration and plugging the hose from the intake manifold?
Does increasing the amount of fuel will be as big as the mount ALDA?
For now the project is supposed to be 100 hp, later Ream and eventually pump 150 hp with a spray of oil on the pistons.
What do you think?
Does anyone have any diagrams, drawings of how the ADA and ALDA?
The EPC and WIS is not too much.
RE: om601 injection pump and ALDA - pp d - 05-31-2012
The ADA is no-good.
It goes all the way with 0,1 bar pressure.
RE: om601 injection pump and ALDA - starykot - 06-03-2012
Is there a chance that, after assembly of ALDA will pump as much change as the dose of the factory turbo engines?
RE: om601 injection pump and ALDA - anjay - 06-03-2012
What are you looking for as a goal of this modification? ALDA is reducing amount of fuel at low rpm
in order to reduce smoke emission. At high rpm gives a full fuel enrichment when turbo kicks in and is producing high boost.
RE: om601 injection pump and ALDA - starykot - 06-05-2012
When you overclock the injection pump can be problems idling, uneven work, ALDA would solve this problem, if I'm wrong?
RE: om601 injection pump and ALDA - anjay - 06-10-2012
I not think so! You have to get pump properly adjusted.
RE: om601 injection pump and ALDA - starykot - 06-11-2012
So I overclocked ALDA and injection pump in a bunch om601 not?
I do not know whether the end to understand, I use the google translator, I do not know English well.