+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Turbo oil supply - OM606 and HX40 Super (/showthread.php?tid=5380)
Turbo oil supply - OM606 and HX40 Super - Domino81 - 02-28-2014
Hi guys, my turbo just died yesterday.
I have paid only 120 EUR for it, and I am not sad or supprised it happened. The only thing is that before it died it used to produce 2,5bar pressure.
It's now stuck so that I even cannot move the compression wheel...
Question is: do you modify the oil supply on OM 606 in any manner by reducer on the oil-out so that the pressure of oil in the turbo is a bit higher?
Best.
RE: Turbo oil supply - OM606 and HX40 Super - swampmonkey - 02-28-2014
on the one ive seen the oilsupply pressure is limited to around 3bar...
limited pressure, not increased...
hx40super and om606 that is.
RE: Turbo oil supply - OM606 and HX40 Super - Mark_M - 02-28-2014
Don't reduce the oil out. All that will happen is it will blow by the seals and come out the exhaust. The out needs to be as vertically down and free flowing as possible.