+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Oil Temp and Pressure sender location? (/showthread.php?tid=6403)
Oil Temp and Pressure sender location? - Booster - 04-01-2015
Where does everyone put there Oil temp and pressure senders??
This is on a om605.
What thread is used also? 1/8th not??
Thanks!
RE: Oil Temp and Pressure sender location? - barrote - 04-01-2015
got mine bolted in the filter housing in a flat surface. pressure sender is the original MB.
RE: Oil Temp and Pressure sender location? - Booster - 04-01-2015
(04-01-2015, 03:15 PM)barrote got mine bolted in the filter housing in a flat surface. pressure sender is the original MB.
I can't see where you mean? original fitment? I don't suppose you have a picture?
Thanks
RE: Oil Temp and Pressure sender location? - barrote - 04-02-2015
yep i dont,
remome the filter housing, they usually are interchangeable, drill a hole in a flat surface in such a way that it does not disturb the filter element. cut a thread and bolt on the temp sender. usually they look like a bolt. sender for pressure transmiter u can have from the original plug, even if your car filter housing does not have the plug there, u have the hole tapped there. actually usually there is 2 of them , but one is not suitable for press take.