+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Setting up a superpump (/showthread.php?tid=6786)
Setting up a superpump - RickyE - 10-03-2015
Hello, i recently got my pump with dieselmekins 7.5mm elements fitted, however i cant get it to tun right, it wont tick over for me and when i do get it to tick over its hanging the revs.
When im holding revs on it its running smoothly.
Can anyone help me set it up. I have tried screwing the tickover up, but the screw is nearly through the nut and it still wont tick over
Sorry if that doesnt make any sense, hopefully someone understands
Cheers
RE: Setting up a superpump - minim - 10-03-2015
I'm not sure I understand, but did you connect the Alda to the pressure side of the intake? Does it move during boost?
RE: Setting up a superpump - barrote - 10-03-2015
take it out , sincronize it and it will be fine...
RE: Setting up a superpump - TurboTim - 10-03-2015
What he said...
RE: Setting up a superpump - gary andrews - 10-03-2015
take it out check your not 180 out put back in 10-11 deg after, sounds like timings out
RE: Setting up a superpump - RickyE - 10-04-2015
No alda on it, its a na pump
Will try that, it runs fine on boost and have had it driving, but will try taking it off and timing it up again, cheers