Holseth HX30W Pressure side V-band - Printable Version +- STD (https://www.superturbodiesel.com/std) +-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6) +--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7) +--- Thread: Holseth HX30W Pressure side V-band (/showthread.php?tid=6790)

Holseth HX30W Pressure side V-band - minim - 10-04-2015 Anyone got an idea of what clamps to use on the Holseth HX30W on the pressurised air output? It looks like something between 2.25" and 2.5" but I'm having a hard time finding something that fits. Some size info sheet I found at frozenboost for reference. RE: Holseth HX30W Pressure side V-band - TurboTim - 10-05-2015 I just ground mine down and used regular silicone coupler. You can find that elbow on ebay though if you look. RE: Holseth HX30W Pressure side V-band - MFSuper90 - 10-05-2015 I welded a pipe onto mine so I could use a silicone adapter. So basically the same as turbo tim RE: Holseth HX30W Pressure side V-band - Tito - 10-05-2015 I also ground mine down to a little hump so the hose couldn't pop off. RE: Holseth HX30W Pressure side V-band - minim - 10-05-2015 http://m.ebay.com/itm/121389328525?_trkparms=aid=777000&algo=ABA.MBE&ao=1&asc=32480&meid=828b2be59efa4a40bf25fd7ddba61a45&pid=100005&rk=1&rkt=1&sd=111203247660&_trksid=p2047675.c100005.m1851&_mwBanner=1 Something like this then? Was going to use 2.5 Pressure piping. RE: Holseth HX30W Pressure side V-band - Tito - 10-06-2015 That should work fine. RE: Holseth HX30W Pressure side V-band - Hario' - 10-06-2015 You need a 2.5" V-band clamp.. RE: Holseth HX30W Pressure side V-band - minim - 10-06-2015 According to the document I attached the 2.5" is 1" to big..