+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: om606 24V 300D 95-96 (/showthread.php?tid=681)
om606 24V 300D 95-96 - countach - 09-13-2009
has 300 Diesel 24V 95-96 non-turbo oil spray on the pistons?
can i put a big turbo on this engine? and put 7mm element in ip
RE: om606 24V 300D 95-96 - ForcedInduction - 09-13-2009
No, the engine does not have piston cooling and its built much weaker.
RE: om606 24V 300D 95-96 - countach - 09-14-2009
(09-13-2009, 03:14 PM)ForcedInduction No, the engine does not have piston cooling and its built much weaker.
is that from om606? yes its mutch weaker i see. did the 24v top fit on the 12V turbo engine?
RE: om606 24V 300D 95-96 - Kozuka - 09-14-2009
(09-14-2009, 12:33 AM)countach(09-13-2009, 03:14 PM)ForcedInduction No, the engine does not have piston cooling and its built much weaker.
is that from om606? yes its mutch weaker i see. did the 24v top fit on the 12V turbo engine?
There are reports of the oil and water passages of not being the same. I still haven't seen the side-by-side of the two head gaskets though. Could do it Honda style haha.
RE: om606 24V 300D 95-96 - Einar - 09-15-2009
Are You sure about the oil spray on the pistons, I`ve heard that all OM60X got it from a certaint year, but not sure about.
TNX for the pictures :-)