+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: HE351 Have T4 connector? (/showthread.php?tid=6918)
HE351 Have T4 connector? - deviance - 12-09-2015
I don't know in english.
Thank You!
RE: HE351 Have T4 connector? - TurboTim - 12-09-2015
If you are talking about exhaust flange its more like a T3.5. Its not really T3 flange or T4. Its wider then T3 but not as tall as T4
RE: HE351 Have T4 connector? - deviance - 12-09-2015
So is it bad if i cut T4 with CNC?
RE: HE351 Have T4 connector? - hents99 - 12-09-2015
(12-09-2015, 12:20 PM)deviance So is it bad if i cut T4 with CNC?
I can give you 10mm steel flange for this turbo.
RE: HE351 Have T4 connector? - raysorenson - 12-09-2015
It's a T4i. Same port size, different bolt pattern.
RE: HE351 Have T4 connector? - MFSuper90 - 12-09-2015
T4 can be made into a t4i, but if you already have to cut one, id go ahead and make it correct. Same flange as most hx52