+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Help - PS pump removal (/showthread.php?tid=7102)
Help - PS pump removal - ho55 - 03-18-2016
How on earth do you get the PS pump removed on a OM606.962 (W210)
You cant get to the mount bolts until you have the pulley off, and my pulley wont budge.
The centre nut is stuck. I have tried with the bolt on to hold it, with an air gun and a bit of heat.And stripped the teeth of 2 sockets.
Is there any way to get the pump off without removing the pulley?
RE: Help - PS pump removal - AlanMcR - 03-18-2016
Might it be a lefty nut?
RE: Help - PS pump removal - ho55 - 03-18-2016
Ok ignore this. Have done it.
I thought the middle nut had to come off, but realized that the pulley pulls off when the 3 bolts are removed.
RE: Help - PS pump removal - baldur - 03-18-2016
Nothing a dab of dynamite won't solve.
RE: Help - PS pump removal - Tito - 03-18-2016
You're not first one to make this mistake... I spend 2 days figuring out how to get the middle crankshaft bolt out but then I realized I needed to loosen the bolts around it to get the pulley off
