DPUK horizontal alda - Printable Version

DPUK horizontal alda - Printable Version

+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: DPUK horizontal alda (/showthread.php?tid=7418)

DPUK horizontal alda - hummermaniac88 - 09-16-2016

Hi guys,

Recieved the DPUK HORIZONTAL ALDA kit for my w463 om606 project with a om603 built m pump. Having trouble figuring where all the parts go. It different than dieselmeken's kit. Someone have experience of have picture.

RE: DPUK horizontal alda - hummermaniac88 - 09-16-2016

I'm trying identify in the dpuk kit what replaces the circled part in dieselmeken's video screenshot.

RE: DPUK horizontal alda - barrote - 09-16-2016

that thing operates by controling(restricting) the rack movement with the stop lever, which in normal operation will pull the rack back in switch of mode.
one of the parts is to be assembled in place of the manual switch off control , the other with the actuator is to operate the lever.
then u have (should have) the other parts wich are to limit the min and the max, basically are mechanichal stops.
but looking at the thing , it looks like u have too much parts.....
puzzle it

RE: DPUK horizontal alda - hummermaniac88 - 09-19-2016

Thanks for the info, but those two plates are still bothering me. Can't see seem to fire out how they fit onto the pump. Dpuk isn't responding either.

RE: DPUK horizontal alda - barrote - 09-20-2016

i haven´t seen their system, in my hands ... i use the dieselmeken system and this should be very similar cause dpuk is a kind of parter with this fellas.
but sometimes can be a bit puzling .
in the end u must have the 2 functions this device alowws. limit max rack without boost and limit max rack irespective of boost. once u have this 2 functions , thats it.(even if u have extra parts in the end)
good luck

RE: DPUK horizontal alda - Nev - 09-23-2016

Same ALDA on my 602 pump. Hope that helps.

[Image: 14264904_10157286601925276_3524806345887...e=58399484]

RE: DPUK horizontal alda - NZScott - 09-23-2016

That's a vertical one so not the same unfortunately Wink

RE: DPUK horizontal alda - Nev - 09-24-2016

(09-23-2016, 08:31 PM)NZScott That's a vertical one so not the same unfortunately