+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Drivetrain (https://www.superturbodiesel.com/std/forumdisplay.php?fid=9)
+--- Thread: om603 what tranny use ? (/showthread.php?tid=7463)
om603 what tranny use ? - jarow123 - 10-10-2016
My plans with om603 by 7 mm element go on the 300PS, the question is which gear box is strong for use?
RE: om603 what tranny use ? - benzguy - 10-10-2016
The strongest gear box you can use in a 603 with a single mass flywheel is the getrug 5 speed from a w201 16V the 717404
RE: om603 what tranny use ? - jarow123 - 10-11-2016
thanks and gear box from c250td 717.460 is good or no ?
RE: om603 what tranny use ? - Evgeniy1987 - 10-11-2016
Are you sure a 716.649 is not stronger ?
RE: om603 what tranny use ? - benzguy - 10-11-2016
I don't know any thing about the 716649 because it never came to the USA I do know that you must have a single mass flywheel for a super turbo the dual mass flywheels will come apart if you use it in a super turbo engine
RE: om603 what tranny use ? - capflya - 10-15-2016
I think F.R.A.S. and diesel pump U.K. Have a single mass flywheel conversion for dual mass transmissions? Might just be for the BMW transmissions though I forget all the details...