+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Opinion regarding the turbo (/showthread.php?tid=8309)
Opinion regarding the turbo - miguelrocha - 02-04-2020
Friends that turbo prefer for an Om605 pump 7.5 dieselmeken
- Borgwarner S200SXE S257
- Holset HX35 exhaust part 12cm
Thanks
RE: Opinion regarding the turbo - wiseman89 - 02-04-2020
Ive read alot on other forums that the Borgwarner turbos are better and more efficient than the Holset. But the holset is cheaper.
It depends on you budget, Id go BW.
RE: Opinion regarding the turbo - Mallinman - 02-04-2020
I’m running the s200 with 7.5mm elements and it goes very well. It’s on a custom intake and exhaust manifold to maximise the flow but it Really lights up well and fast. . And that’s in a big pick up truck.
RE: Opinion regarding the turbo - miguelrocha - 02-04-2020
(02-04-2020, 04:32 PM)Mallinman I’m running the s200 with 7.5mm elements and it goes very well. It’s on a custom intake and exhaust manifold to maximise the flow but it Really lights up well and fast. . And that’s in a big pick up truck.
What A / R are you using?
Single Scrool A / R 63 Or TwinScrool A / R 78? Thanks
RE: Opinion regarding the turbo - Mallinman - 02-05-2020
Single scroll. I swapped the exhaust out to a .48 a/r. I need as much low down grunt as possible. I tow a lot with it.