+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Source for Bosio Nozzles and Shims (/showthread.php?tid=8352)
Source for Bosio Nozzles and Shims - zeeman - 05-18-2020
Looking for source for SD - 310 Bosio nozzles and shims. This is the nozzles my previous injector rebuilder was using, who doesn't do it anymore.
RE: Source for Bosio Nozzles and Shims - X Double Dot - 05-19-2020
(05-18-2020, 11:58 AM)zeeman Looking for source for SD - 310 Bosio nozzles and shims. This is the nozzles my previous injector rebuilder was using, who doesn't do it anymore.
so out of curiosity, are the 310's what you plan to use in a 606.962? I ask because i tried some 310 monarks initially before switching to the 314 (by Firad) because i heard that was what was supposed to be in a .962.
not at all what you asked, but ID parts has the 314 Firads (https://www.idparts.com/firad-injector-nozzle-an0sd314-p-3085.html). Figured i'd post it as reference for someone else looking
RE: Source for Bosio Nozzles and Shims - zeeman - 05-19-2020
X Double DotThe company that was rebuilding my injectors DDW were using the Bosio 310's in the 606 IDI injectors, they claimed they put out more fuel. I am not sure if this is true or not, what is the difference between the 310 and the 314 volume wise ?zeeman Looking for source for SD - 310 Bosio nozzles and shims. This is the nozzles my previous injector rebuilder was using, who doesn't do it anymore.
so out of curiosity, are the 310's what you plan to use in a 606.962? I ask because i tried some 310 monarks initially before switching to the 314 (by Firad) because i heard that was what was supposed to be in a .962.
not at all what you asked, but ID parts has the 314 Firads (https://www.idparts.com/firad-injector-nozzle-an0sd314-p-3085.html). Figured i'd post it as reference for someone else looking