manual conversion for a SDL?
manual conversion for a SDL?
![[Image: img1231808006712-1.jpg]](http://i459.photobucket.com/albums/qq320/cannonballsdl/img1231808006712-1.jpg)
![[Image: img1231724701604-1-1.jpg]](http://i459.photobucket.com/albums/qq320/cannonballsdl/img1231724701604-1-1.jpg)
![[Image: img1231603208122.jpg]](http://i459.photobucket.com/albums/qq320/cannonballsdl/img1231603208122.jpg)
cannonballSDL
09-14-2008, 10:17 AM #1no no not the benz 4 speed! but has any one adapted a gm or ford tranny for a mercedes? or dose anyone make adapter plates? im looking for eather a 5 speed auto or 6 speed manual...any help?
<!-- m --><a class="postlink" href="http://www.4x4labs.com/">http://www.4x4labs.com/</a><!-- m -->
GREASY_BEAST
09-14-2008, 08:20 PM #2these guys claim to have one
<!-- m --><a class="postlink" href="http://www.4x4labs.com/">http://www.4x4labs.com/</a><!-- m -->
There are plenty of common MB 5-speeds that will bolt straight to your engine from a 190D.
ForcedInduction
09-15-2008, 01:53 AM
#3
Expect to spend $500-1000 if you want somebody to make you an adapter and flywheel that will work.
There are plenty of common MB 5-speeds that will bolt straight to your engine from a 190D.
GREASY_BEAST these guys claim to have oneo rly! thats kinda what in looking for... but the 617 haz a different bolt patteren then the 603 right?
<!-- m --><a class="postlink" href="http://www.4x4labs.com/">http://www.4x4labs.com/</a><!-- m -->
hey FI, the 190d haz a straight bolt of to the 603? if so thats awsome! could i use a pedal box from the 240 in the sdl?
cannonballSDL
09-17-2008, 07:40 PM #4GREASY_BEAST these guys claim to have oneo rly! thats kinda what in looking for... but the 617 haz a different bolt patteren then the 603 right?
<!-- m --><a class="postlink" href="http://www.4x4labs.com/">http://www.4x4labs.com/</a><!-- m -->
hey FI, the 190d haz a straight bolt of to the 603? if so thats awsome! could i use a pedal box from the 240 in the sdl?
Unfortunately those won't bolt to the OM61x series. :cry:
I don't see any reason why you couldn't use a 240D master cylinder. The primary difference between the trannys in the W123/W201 is the starter location.
ForcedInduction
09-18-2008, 04:06 AM
#5
Yes, the OM60x series share the same bolt pattern. The 190D 2.2 and 2.5 models were common with 4 and 5 speeds.
Unfortunately those won't bolt to the OM61x series. :cry:
I don't see any reason why you couldn't use a 240D master cylinder. The primary difference between the trannys in the W123/W201 is the starter location.
cannonballSDL
09-19-2008, 05:08 PM #6i would rather have a cable clutch, but if the pedal box isent a fit that could suck... but both ways i found a 5 speed and im happy!
3 Guest(s)
3 Guest(s)