C124 300 turbodiesel

STD Other Projects C124 300 turbodiesel

C124 300 turbodiesel

C124 300 turbodiesel

View a Printable Version

0 Vote(s) - 0 Average

mb-rene

Naturally-aspirated

21

10-17-2010, 02:44 AM #1

Hello,
this coupe started as a 230ce when i bought it two yars ago,i did a complete conversion to a 300 turbodiesel
since then a daily driver

gr rene

This post was last modified: 10-17-2010, 02:47 AM by mb-rene.

mb-rene

10-17-2010, 02:44 AM #1

Hello,
this coupe started as a 230ce when i bought it two yars ago,i did a complete conversion to a 300 turbodiesel
since then a daily driver

gr rene

~~ForcedInduction~~

Banned

3,628

10-17-2010, 07:59 AM #2

Thats a very clean conversion.

Was the right fender a straight swap from the sedan?

ForcedInduction

10-17-2010, 07:59 AM #2

Thats a very clean conversion.

Was the right fender a straight swap from the sedan?

mb-rene

Naturally-aspirated

21

10-17-2010, 09:40 AM #3

(10-17-2010, 07:59 AM)ForcedInduction Thats a very clean conversion.

Was the right fender a straight swap from the sedan?

thanks, yes the right fender is the same,
gr rene

mb-rene

10-17-2010, 09:40 AM #3

(10-17-2010, 07:59 AM)ForcedInduction Thats a very clean conversion.

Was the right fender a straight swap from the sedan?

thanks, yes the right fender is the same,
gr rene

Six in a row make her go!

2,507

10-17-2010, 11:30 AM #4

Very nice you must have a euro exhaust manifold? The w124 coups are a very n ice looking car

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

willbhere4u

10-17-2010, 11:30 AM #4

Very nice you must have a euro exhaust manifold? The w124 coups are a very n ice looking car

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

~~ForcedInduction~~

Banned

3,628

10-17-2010, 12:26 PM #5

(10-17-2010, 11:30 AM)willbhere4u Very nice you must have a euro exhaust manifold?

Thats all he has since hes in the netherlands. Wink

Wink

ForcedInduction

10-17-2010, 12:26 PM #5

(10-17-2010, 11:30 AM)willbhere4u Very nice you must have a euro exhaust manifold?

Thats all he has since hes in the netherlands. Wink

Wink

mb-rene

Naturally-aspirated

21

10-17-2010, 12:34 PM #6

(10-17-2010, 11:30 AM)willbhere4u Very nice you must have a euro exhaust manifold? The w124 coups are a very n ice looking car

thanks,yes i think so,i know of two exhaust manifolds,with or without egr

gr rene

mb-rene

10-17-2010, 12:34 PM #6

(10-17-2010, 11:30 AM)willbhere4u Very nice you must have a euro exhaust manifold? The w124 coups are a very n ice looking car

thanks,yes i think so,i know of two exhaust manifolds,with or without egr

gr rene

garage

Bush Taxi

893

10-17-2010, 01:33 PM #7

VERY NICE!
That is one sweet ride.

1987 300D: EGR Delete, ARV Delete, Cold Air Intake...

garage

10-17-2010, 01:33 PM #7

VERY NICE!
That is one sweet ride.

1987 300D: EGR Delete, ARV Delete, Cold Air Intake...

winmutt

bitbanger

3,468

10-18-2010, 04:37 PM #8

Nice wheels! What are those? Is that a WALD I replica kit or?

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

winmutt

10-18-2010, 04:37 PM #8

Nice wheels! What are those? Is that a WALD I replica kit or?

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

Six in a row make her go!

2,507

10-18-2010, 10:10 PM #9

I wish I could get my hands on one of those manifolds over here in the US lol!

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

willbhere4u

10-18-2010, 10:10 PM #9

I wish I could get my hands on one of those manifolds over here in the US lol!

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

mb-rene

Naturally-aspirated

21

10-19-2010, 11:09 AM #10

(10-18-2010, 04:37 PM)winmutt Nice wheels! What are those? Is that a WALD I replica kit or?

wheels are keskin kt5 18" 8,5J ET 35 225/40 tyres
frontbumper and rear spoiler AMG original Big Grin

Big Grin

sadly no rearbumper and sideskirt...yet

(10-18-2010, 10:10 PM)willbhere4u I wish I could get my hands on one of those manifolds over here in the US lol!

is there a big difference with the us manifold?

This post was last modified: 10-19-2010, 11:12 AM by mb-rene.

gr rene
w124 300 turbodiesel '86
C124 300 turbodiesel coupe '93
w114 300 turbodiesel '69
http://youtu.be/RFLEg7X09dI

mb-rene

10-19-2010, 11:09 AM #10

(10-18-2010, 04:37 PM)winmutt Nice wheels! What are those? Is that a WALD I replica kit or?

wheels are keskin kt5 18" 8,5J ET 35 225/40 tyres
frontbumper and rear spoiler AMG original Big Grin

Big Grin

sadly no rearbumper and sideskirt...yet

(10-18-2010, 10:10 PM)willbhere4u I wish I could get my hands on one of those manifolds over here in the US lol!

is there a big difference with the us manifold?

gr rene
w124 300 turbodiesel '86
C124 300 turbodiesel coupe '93
w114 300 turbodiesel '69
http://youtu.be/RFLEg7X09dI

Six in a row make her go!

2,507

10-19-2010, 12:12 PM #11

yea the US version sucks!

Here is a picture I stole off of this sight from a different forum it's like a log manifold that has a trap oxidizer delete installed between the turbo and the manifold

Mercedes recalled the trap oxidizer for creating excessive heat and damaging the cylinder heads

note the manifold is behind the turbo it goes through a lot of stupid bends to get to the turbo!

This post was last modified: 10-19-2010, 12:26 PM by willbhere4u.

Attached Files

Image(s)

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

willbhere4u

10-19-2010, 12:12 PM #11

yea the US version sucks!

Here is a picture I stole off of this sight from a different forum it's like a log manifold that has a trap oxidizer delete installed between the turbo and the manifold

Mercedes recalled the trap oxidizer for creating excessive heat and damaging the cylinder heads

note the manifold is behind the turbo it goes through a lot of stupid bends to get to the turbo!

Attached Files

Image(s)

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

mb-rene

Naturally-aspirated

21

10-20-2010, 09:54 AM #12

oke thanks,that is really a strange contraption,also the turbohousing is different

gr rene
w124 300 turbodiesel '86
C124 300 turbodiesel coupe '93
w114 300 turbodiesel '69
http://youtu.be/RFLEg7X09dI

mb-rene

10-20-2010, 09:54 AM #12

oke thanks,that is really a strange contraption,also the turbohousing is different

gr rene
w124 300 turbodiesel '86
C124 300 turbodiesel coupe '93
w114 300 turbodiesel '69
http://youtu.be/RFLEg7X09dI

Anis
Unregistered

12-16-2013, 03:51 PM #13

(10-17-2010, 02:44 AM)mb-rene Hello,
this coupe started as a 230ce when i bought it two yars ago,i did a complete conversion to a 300 turbodiesel
since then a daily driver

gr rene

Hi MB Rene, I'm writing to you from Tunisia, I'm planning to do the same modification on a coupé c124, could you please explain the different steps of the operation ? Photos, what are the different things not to forget ?
Thanks !

Anis

12-16-2013, 03:51 PM #13

(10-17-2010, 02:44 AM)mb-rene Hello,
this coupe started as a 230ce when i bought it two yars ago,i did a complete conversion to a 300 turbodiesel
since then a daily driver

gr rene

Hi MB Rene, I'm writing to you from Tunisia, I'm planning to do the same modification on a coupé c124, could you please explain the different steps of the operation ? Photos, what are the different things not to forget ?
Thanks !

Holset

287

12-17-2013, 07:07 AM #14

What a fantastic conversion.

How did you wire in the vacuum stop, glow plug unit and the rev counter?

I have yet to find a rot free w124 saloon for my 606 project, so may start looking at coupes, as have seen loads of clean ones.

Cheers,

Max

W124 om606 HX40 finished and it's a beauty 450bhp/456ft-lbs

maxypriest

12-17-2013, 07:07 AM #14

What a fantastic conversion.

How did you wire in the vacuum stop, glow plug unit and the rev counter?

I have yet to find a rot free w124 saloon for my 606 project, so may start looking at coupes, as have seen loads of clean ones.

Cheers,

Max

W124 om606 HX40 finished and it's a beauty 450bhp/456ft-lbs

mb-rene

Naturally-aspirated

21

12-17-2013, 11:34 AM #15

Thanks....
i replaced compleet wire loom and ignition

gr rene
w124 300 turbodiesel '86
C124 300 turbodiesel coupe '93
w114 300 turbodiesel '69
http://youtu.be/RFLEg7X09dI

mb-rene

12-17-2013, 11:34 AM #15

Thanks....
i replaced compleet wire loom and ignition

gr rene
w124 300 turbodiesel '86
C124 300 turbodiesel coupe '93
w114 300 turbodiesel '69
http://youtu.be/RFLEg7X09dI

Holset

287

12-17-2013, 12:04 PM #16

(12-17-2013, 11:34 AM)mb-rene Thanks....
i replaced compleet wire loom and ignition

Was it a lot of work to swap over?

W124 om606 HX40 finished and it's a beauty 450bhp/456ft-lbs

maxypriest

12-17-2013, 12:04 PM #16

(12-17-2013, 11:34 AM)mb-rene Thanks....
i replaced compleet wire loom and ignition

Was it a lot of work to swap over?

W124 om606 HX40 finished and it's a beauty 450bhp/456ft-lbs

Tito

Holset

354

12-17-2013, 12:42 PM #17

Nice ride! Where are you from Rene?

Tito

12-17-2013, 12:42 PM #17

Nice ride! Where are you from Rene?

mb-rene

Naturally-aspirated

21

12-17-2013, 01:25 PM #18

for wire loom , you have to take out the dash , then it's easy access
compleet swap cost me two weeks

@ Tito Colijnsplaat Zeeland

gr rene
w124 300 turbodiesel '86
C124 300 turbodiesel coupe '93
w114 300 turbodiesel '69
http://youtu.be/RFLEg7X09dI

mb-rene

12-17-2013, 01:25 PM #18

for wire loom , you have to take out the dash , then it's easy access
compleet swap cost me two weeks

@ Tito Colijnsplaat Zeeland

gr rene
w124 300 turbodiesel '86
C124 300 turbodiesel coupe '93
w114 300 turbodiesel '69
http://youtu.be/RFLEg7X09dI

Holset

420

12-20-2013, 12:23 PM #19

How did you sort he prop shaft? I had mine shortened as I wanted to keep the 110m flex discs Smile

Smile

[Image: conv10.jpg]

____________________________________

'88 300CD Turbo Coupé - OM603

DiseaselWeasel

12-20-2013, 12:23 PM #19

How did you sort he prop shaft? I had mine shortened as I wanted to keep the 110m flex discs Smile

[Image: conv10.jpg]

____________________________________

'88 300CD Turbo Coupé - OM603

mb-rene

Naturally-aspirated

21

12-20-2013, 01:45 PM #20

Yes i did too

gr rene
w124 300 turbodiesel '86
C124 300 turbodiesel coupe '93
w114 300 turbodiesel '69
http://youtu.be/RFLEg7X09dI

mb-rene

12-20-2013, 01:45 PM #20

Yes i did too

gr rene
w124 300 turbodiesel '86
C124 300 turbodiesel coupe '93
w114 300 turbodiesel '69
http://youtu.be/RFLEg7X09dI

mario

TA 0301

70

12-20-2013, 03:47 PM #21

Looking very well as I love the wheels

mario

12-20-2013, 03:47 PM #21

Looking very well as I love the wheels

mb-rene

Naturally-aspirated

21

12-21-2013, 02:41 AM #22

gr rene
w124 300 turbodiesel '86
C124 300 turbodiesel coupe '93
w114 300 turbodiesel '69
http://youtu.be/RFLEg7X09dI

mb-rene

12-21-2013, 02:41 AM #22

gr rene
w124 300 turbodiesel '86
C124 300 turbodiesel coupe '93
w114 300 turbodiesel '69
http://youtu.be/RFLEg7X09dI

mario

TA 0301

70

12-21-2013, 03:56 AM #23

Looking very well there man

mario

12-21-2013, 03:56 AM #23

Looking very well there man

View a Printable Version

0 Vote(s) - 0 Average

Users browsing this thread:
10 Guest(s)

Users browsing this thread:
10 Guest(s)