STD Tuning Engine What is MYNA pump or Best IP for 617 Turbo

What is MYNA pump or Best IP for 617 Turbo

What is MYNA pump or Best IP for 617 Turbo

 
  • 0 Vote(s) - 0 Average
 
Oil Burner
Turbo Everyting!!!

83
11-07-2010, 02:04 PM #1
What is a MYNA pump, What is the best most profitable pump for the 617 turbo engine and where do you get them?
Can a 617 IP be turned up at a good IP shop or turned into a MYNA pump, and does anyone no of a good IP shop here in northern California or anywhere. DO you have a approximate cost of this too?

Thanks

08 Ram Cummins 6.7 Mega Cab 4wd Beauty & Towing Mods, 97 Ram Cummins 5.9 Extended Cab 4wd. Engine, Tansmission, and Funtional Mods, 90 Suburban 4wd Stock, 83 300D Pats Car, 80 300CD in Restoration and Fabrication Process( was non turbo...now TurboBig Grin) 75 Ramcharger 4wd Someday Cummins Power ProjectTongue
Oil Burner
11-07-2010, 02:04 PM #1

What is a MYNA pump, What is the best most profitable pump for the 617 turbo engine and where do you get them?
Can a 617 IP be turned up at a good IP shop or turned into a MYNA pump, and does anyone no of a good IP shop here in northern California or anywhere. DO you have a approximate cost of this too?

Thanks


08 Ram Cummins 6.7 Mega Cab 4wd Beauty & Towing Mods, 97 Ram Cummins 5.9 Extended Cab 4wd. Engine, Tansmission, and Funtional Mods, 90 Suburban 4wd Stock, 83 300D Pats Car, 80 300CD in Restoration and Fabrication Process( was non turbo...now TurboBig Grin) 75 Ramcharger 4wd Someday Cummins Power ProjectTongue

garage
Bush Taxi

893
11-07-2010, 02:13 PM #2
Myna is a company in Finland who modifies the pumps to increase the fueling. If you wanted to buy a Myna tuned pump, itll be about $1,600-$2,000 approximetly.
You yourself can take the IP off and turn up the fueling some, but for big power you need new elements.
If you want larger elements you can contact Tomnik, and DervTuning on this forum, they can help you out with installing larger elements. It will be cheaper than Myna, but still not cheap.

1987 300D: EGR Delete, ARV Delete, Cold Air Intake...
garage
11-07-2010, 02:13 PM #2

Myna is a company in Finland who modifies the pumps to increase the fueling. If you wanted to buy a Myna tuned pump, itll be about $1,600-$2,000 approximetly.
You yourself can take the IP off and turn up the fueling some, but for big power you need new elements.
If you want larger elements you can contact Tomnik, and DervTuning on this forum, they can help you out with installing larger elements. It will be cheaper than Myna, but still not cheap.


1987 300D: EGR Delete, ARV Delete, Cold Air Intake...

300SD_KY
super turbo diesel

121
11-07-2010, 07:08 PM #3
not affiliated but chatting with Teemu from www.blacksmokeracing.com ... he is results oriented, and offers this service too.

Not sure yet if bench tested, etc ... but if he reads this, hopefully he will weigh in.
300SD_KY
11-07-2010, 07:08 PM #3

not affiliated but chatting with Teemu from www.blacksmokeracing.com ... he is results oriented, and offers this service too.

Not sure yet if bench tested, etc ... but if he reads this, hopefully he will weigh in.

ForcedInduction
Banned

3,628
11-08-2010, 01:18 AM #4
"blacksmokeracing", not exactly a name I'd choose in this time.
Smoke is quickly (and thankfully) becoming "not cool" to diesel owners that know what they're doing and especially public relations.

Nothing says "cool" like bringing back the "dirty diesel" image from the 80's! Rolleyes
ForcedInduction
11-08-2010, 01:18 AM #4

"blacksmokeracing", not exactly a name I'd choose in this time.
Smoke is quickly (and thankfully) becoming "not cool" to diesel owners that know what they're doing and especially public relations.

Nothing says "cool" like bringing back the "dirty diesel" image from the 80's! Rolleyes

Oil Burner
Turbo Everyting!!!

83
11-12-2010, 04:54 PM #5
Black smoke is not a huge problem but I dont want it coming out like a freight train. As long as it clears up by cruising speed, Im not looking for crazy power just a little extra off the line power. I have had 3 of these W123 and the best part about them is the cruising speed the down side it getting them their.

Whats the proper route on these 617 engine's IP then Injectors or you have to do both at the same time? Budget is real tight I have to admit.

08 Ram Cummins 6.7 Mega Cab 4wd Beauty & Towing Mods, 97 Ram Cummins 5.9 Extended Cab 4wd. Engine, Tansmission, and Funtional Mods, 90 Suburban 4wd Stock, 83 300D Pats Car, 80 300CD in Restoration and Fabrication Process( was non turbo...now TurboBig Grin) 75 Ramcharger 4wd Someday Cummins Power ProjectTongue
Oil Burner
11-12-2010, 04:54 PM #5

Black smoke is not a huge problem but I dont want it coming out like a freight train. As long as it clears up by cruising speed, Im not looking for crazy power just a little extra off the line power. I have had 3 of these W123 and the best part about them is the cruising speed the down side it getting them their.

Whats the proper route on these 617 engine's IP then Injectors or you have to do both at the same time? Budget is real tight I have to admit.


08 Ram Cummins 6.7 Mega Cab 4wd Beauty & Towing Mods, 97 Ram Cummins 5.9 Extended Cab 4wd. Engine, Tansmission, and Funtional Mods, 90 Suburban 4wd Stock, 83 300D Pats Car, 80 300CD in Restoration and Fabrication Process( was non turbo...now TurboBig Grin) 75 Ramcharger 4wd Someday Cummins Power ProjectTongue

ben2go
Diesel Dumby

129
11-12-2010, 07:32 PM #6
Injectors so they'll be ready for the modified IP and bigger turblow.

1990 Mercury Blue Max Cougar 3.8L with Automatic
Future OM617 Super Turbo Diesel Conversion with T56 6 Speed Manual
ben2go
11-12-2010, 07:32 PM #6

Injectors so they'll be ready for the modified IP and bigger turblow.


1990 Mercury Blue Max Cougar 3.8L with Automatic
Future OM617 Super Turbo Diesel Conversion with T56 6 Speed Manual

muuris
OM605

318
11-13-2010, 03:29 PM #7
If the injectors are working fine, don't touch them! You don't need bigger injectors in an IDI engine.
muuris
11-13-2010, 03:29 PM #7

If the injectors are working fine, don't touch them! You don't need bigger injectors in an IDI engine.

ForcedInduction
Banned

3,628
11-13-2010, 06:21 PM #8
Right. modifying the injectors, other than nozzle type, will only make smoke.
ForcedInduction
11-13-2010, 06:21 PM #8

Right. modifying the injectors, other than nozzle type, will only make smoke.

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)