My first W463

0 Vote(s) - 0 Average

pako

Naturally-aspirated

5

01-23-2011, 07:21 AM #1

Hi,

I have a MB g class w463, it was a 350 turbo diesel.
But when i got the head changed, then the engine went.
So i swapt it for a om606 turbo diesel. and put the IP of the 350.
But i need some advice regarding the timing, the IP is not modified.
And do i need to time the IP as well if so can someone tell me how i should do it.
Both the timing of the engine aswell as the IP .

It is my first conversion, so i'm kinda new to it ,

and this forum is very useful, I learned a lot from all of you all.

Thank you,

Zirgham

This post was last modified: 01-23-2011, 07:39 AM by pako.

pako

01-23-2011, 07:21 AM #1

Syncro_G

0-60 in 29 sec

280

01-23-2011, 09:56 AM #2

(01-23-2011, 07:21 AM)pako Hi,

I have a MB g class w463, it was a 350 turbo diesel.
But when i got the head changed, then the engine went.
So i swapt it for a om606 turbo diesel. and put the IP of the 350.
But i need some advice regarding the timing, the IP is not modified.
And do i need to time the IP as well if so can someone tell me how i should do it.
Both the timing of the engine aswell as the IP .

It is my first conversion, so i'm kinda new to it ,

and this forum is very useful, I learned a lot from all of you all.

Thank you,

Zirgham

Hi Zirgham, that's a great combination. I know a few people who have done it. both in w463 and in w460 G's. One of them is running without a computer and idles beautifully.

-------------
'84 G-Wagen turbodiesel
'75 240D 4-Speed

Syncro_G

01-23-2011, 09:56 AM #2

(01-23-2011, 07:21 AM)pako Hi,

I have a MB g class w463, it was a 350 turbo diesel.
But when i got the head changed, then the engine went.
So i swapt it for a om606 turbo diesel. and put the IP of the 350.
But i need some advice regarding the timing, the IP is not modified.
And do i need to time the IP as well if so can someone tell me how i should do it.
Both the timing of the engine aswell as the IP .

It is my first conversion, so i'm kinda new to it ,

and this forum is very useful, I learned a lot from all of you all.

Thank you,

Zirgham

Hi Zirgham, that's a great combination. I know a few people who have done it. both in w463 and in w460 G's. One of them is running without a computer and idles beautifully.

-------------
'84 G-Wagen turbodiesel
'75 240D 4-Speed

tomnik

Holset

587

01-23-2011, 10:16 AM #3

Hi,

the IP has a port for a locking device on the left side (on the thicker part of the governor).
The notch which is then visible in the bore shows the IP in 15 deg ATDC.
Lock it there and install the IP when the engine is at 15 deg ATDC on the pulley.

Tom

tomnik

01-23-2011, 10:16 AM #3

pako

Naturally-aspirated

5

01-23-2011, 10:46 AM #4

Thank for such a quick reply, do you have a illustration of it. that would be great.
But any way, I will try to do it. If i fail i will let you know .

Yours,

Zirgham

pako

01-23-2011, 10:46 AM #4

Thank for such a quick reply, do you have a illustration of it. that would be great.
But any way, I will try to do it. If i fail i will let you know .

Yours,

Zirgham

Spaceraver

K26-2

40

01-23-2011, 12:13 PM #5

Be very careful to run the engine if the injection time does not match. It could blow.

I wouldn't mind getting an STD.. Tongue

Spaceraver

01-23-2011, 12:13 PM #5

Be very careful to run the engine if the injection time does not match. It could blow.

I wouldn't mind getting an STD.. Tongue

pako

Naturally-aspirated

5

01-23-2011, 12:58 PM #6

yeah hahah i will, thanks for the advice..
Is there any way to control the boost of the Turbo.

(01-23-2011, 09:56 AM)Syncro_G
(01-23-2011, 07:21 AM)pako Hi,

I have a MB g class w463, it was a 350 turbo diesel.
But when i got the head changed, then the engine went.
So i swapt it for a om606 turbo diesel. and put the IP of the 350.
But i need some advice regarding the timing, the IP is not modified.
And do i need to time the IP as well if so can someone tell me how i should do it.
Both the timing of the engine aswell as the IP .

It is my first conversion, so i'm kinda new to it ,

and this forum is very useful, I learned a lot from all of you all.

Thank you,

Zirgham

Hi Zirgham, that's a great combination. I know a few people who have done it. both in w463 and in w460 G's. One of them is running without a computer and idles beautifully.

Thanks for the comment, do you know how they got the Pipe's for the intercooler lined up (my Intercooler is in My front bumper, It a new type bumper from 2000).

This post was last modified: 01-23-2011, 01:03 PM by pako.

pako

01-23-2011, 12:58 PM #6

yeah hahah i will, thanks for the advice..
Is there any way to control the boost of the Turbo.

(01-23-2011, 09:56 AM)Syncro_G
(01-23-2011, 07:21 AM)pako Hi,

I have a MB g class w463, it was a 350 turbo diesel.
But when i got the head changed, then the engine went.
So i swapt it for a om606 turbo diesel. and put the IP of the 350.
But i need some advice regarding the timing, the IP is not modified.
And do i need to time the IP as well if so can someone tell me how i should do it.
Both the timing of the engine aswell as the IP .

It is my first conversion, so i'm kinda new to it ,

and this forum is very useful, I learned a lot from all of you all.

Thank you,

Zirgham

Hi Zirgham, that's a great combination. I know a few people who have done it. both in w463 and in w460 G's. One of them is running without a computer and idles beautifully.

Thanks for the comment, do you know how they got the Pipe's for the intercooler lined up (my Intercooler is in My front bumper, It a new type bumper from 2000).

jeemu

"some people do, some people talk."

457

01-23-2011, 02:12 PM #7

(01-23-2011, 10:16 AM)tomnik Hi,

the IP has a port for a locking device on the left side (on the thicker part of the governor).
The notch which is then visible in the bore shows the IP in 15 deg ATDC.
Lock it there and install the IP when the engine is at 15 deg ATDC on the pulley.

Tom

[OT] Check your PM[/OT]

OM605 600hp diesel drag car build with BMW E30 chassis

jeemu

01-23-2011, 02:12 PM #7

(01-23-2011, 10:16 AM)tomnik Hi,

the IP has a port for a locking device on the left side (on the thicker part of the governor).
The notch which is then visible in the bore shows the IP in 15 deg ATDC.
Lock it there and install the IP when the engine is at 15 deg ATDC on the pulley.

Tom

[OT] Check your PM[/OT]

OM605 600hp diesel drag car build with BMW E30 chassis

pako

Naturally-aspirated

5

01-23-2011, 02:16 PM #8

(01-23-2011, 02:12 PM)jeemu
(01-23-2011, 10:16 AM)tomnik Hi,

the IP has a port for a locking device on the left side (on the thicker part of the governor).
The notch which is then visible in the bore shows the IP in 15 deg ATDC.
Lock it there and install the IP when the engine is at 15 deg ATDC on the pulley.

Tom
[OT] Check your PM[/OT]

Sorry
I got nothing in my PM Tongue

pako

01-23-2011, 02:16 PM #8

(01-23-2011, 02:12 PM)jeemu
(01-23-2011, 10:16 AM)tomnik Hi,

the IP has a port for a locking device on the left side (on the thicker part of the governor).
The notch which is then visible in the bore shows the IP in 15 deg ATDC.
Lock it there and install the IP when the engine is at 15 deg ATDC on the pulley.

Tom
[OT] Check your PM[/OT]

Sorry
I got nothing in my PM Tongue

Syncro_G

0-60 in 29 sec

280

01-24-2011, 01:32 AM #9

(01-23-2011, 12:58 PM)pako Thanks for the comment, do you know how they got the Pipe's for the intercooler lined up (my Intercooler is in My front bumper, It a new type bumper from 2000).

I think he did the same - 463 bumper with the ic in it.
I don't recall any plumbing issues but the IC may have already been there with the previous engine

This post was last modified: 01-24-2011, 01:33 AM by Syncro_G.

-------------
'84 G-Wagen turbodiesel
'75 240D 4-Speed

Syncro_G

01-24-2011, 01:32 AM #9

(01-23-2011, 12:58 PM)pako Thanks for the comment, do you know how they got the Pipe's for the intercooler lined up (my Intercooler is in My front bumper, It a new type bumper from 2000).

I think he did the same - 463 bumper with the ic in it.
I don't recall any plumbing issues but the IC may have already been there with the previous engine

-------------
'84 G-Wagen turbodiesel
'75 240D 4-Speed

View a Printable Version

0 Vote(s) - 0 Average

Users browsing this thread:
3 Guest(s)