240d center motor mount?
240d center motor mount?
05-30-2011, 12:58 PM
#1
I crawled back under to find another engine mount in the center of the oil pan to the cross member dose any one know where to get a new one?
I plan on replacing all of the motor mounts while in here!
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
05-30-2011, 12:58 PM #1So when I was pulling the engine yesterday I removed the shock and the motor mount bolts only to find that the engine still would not come out
I crawled back under to find another engine mount in the center of the oil pan to the cross member dose any one know where to get a new one?
I plan on replacing all of the motor mounts while in here!
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
05-30-2011, 01:35 PM
#2
1979 450SEL 6.9 - stock
1960 220SE
111 tube chassis car/undergoing full restoration. Body work in progress. Merging with a 1996 S500 (119 engine, 722.6 trans, and both subframes)
2005 S55 AMG - stock
1999 SLK230 Kompressor - stock
2006 SLK55 AMG - stock
I replaced mine about 6 months ago, didnt have any luck finding one aftermarket. I just got it from the dealership.
1979 450SEL 6.9 - stock
1960 220SE
111 tube chassis car/undergoing full restoration. Body work in progress. Merging with a 1996 S500 (119 engine, 722.6 trans, and both subframes)
2005 S55 AMG - stock
1999 SLK230 Kompressor - stock
2006 SLK55 AMG - stock
05-31-2011, 04:21 PM
#3
.
Gota love Mercedes Diesels!
.
DeliveryValve
05-31-2011, 04:21 PM #3Are you talking about this... AutohausAZ? Same t-mount smoke linked up.
.
Gota love Mercedes Diesels!
.
05-31-2011, 04:25 PM
#4
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
05-31-2011, 04:25 PM #4Mine looks different than that it bolted to the oil pan with 2 bolts but fit over a 1" flat tang on the front of the cross member?
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
05-31-2011, 04:36 PM
#5
(05-31-2011, 04:25 PM)willbhere4u Mine looks different than that it bolted to the oil pan with 2 bolts but fit over a 1" flat tang on the front of the cross member?
Then it could be a dealer item as MB Tech noted.
.
Gota love Mercedes Diesels!
.
DeliveryValve
05-31-2011, 04:36 PM #5(05-31-2011, 04:25 PM)willbhere4u Mine looks different than that it bolted to the oil pan with 2 bolts but fit over a 1" flat tang on the front of the cross member?
Then it could be a dealer item as MB Tech noted.
.
Gota love Mercedes Diesels!
.
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)