85 w126
85 w126
i have a very cool 300sd and have wondered for some time if my shocks or springs were bad due to the rear end sag and sometimes poor handling. i think that some of the poor handling was due to the S rated tires whcih did not have enough tire wall strength. i now have some H rated tires which seem to be much better.
my question is about the HD springs and shocks. my main objective is to get rid of the rear end sag. i like the ride but hate the sag. Will the HD springs and regular shocks eliminate my problem? i live in western NC and there are a lot of hills and curves. i dont want a super stiff ride but would like a little better handling . money is not too much of an object with this project, so i can get what i need.
Also, if i do the rear suspension job is there anything else i should replace while it is torn apart, i.e. bushing etc. i had looked at getting a bigger sway bar but i dont think it would be that noticeable for the work involved.
after this is done ill look into new injectors and some IP work. any suggestions there.?
Yes The stocks and new springs will help tons. I dont think you need a bigger sway bar. The rear suspension is pretty simple on a w126.
I have Bilstine HD on my car and it rides like it on a cloud and helped lift it up a bit plus if handles great around corners