om 603.912 to om603.960

0 Vote(s) - 0 Average

jWOLF

Naturally-aspirated

5

05-25-2012, 01:31 AM #1

Hello all
I have MB w124 87 with OM603.912
I want set turbo on my diesel engine

My friend have another engine ОМ603.960
What i need to replace from 960 to my 912?
Pump, inlet-outlet collector, turbo, some electronic?
Or pistons and head to?

P.S. Sorry for my poor english Rolleyes

This post was last modified: 05-25-2012, 02:35 AM by jWOLF.

jWOLF

05-25-2012, 01:31 AM #1

aaa

GT2256V

913

05-25-2012, 03:32 AM #2

Why not the whole engine?

aaa

05-25-2012, 03:32 AM #2

Why not the whole engine?

jWOLF

Naturally-aspirated

5

05-25-2012, 04:03 AM #3

(05-25-2012, 03:32 AM)aaa Why not the whole engine?

It almost dead Undecided

jWOLF

05-25-2012, 04:03 AM #3

(05-25-2012, 03:32 AM)aaa Why not the whole engine?

It almost dead Undecided

Hotrodbenz

Boost and roost baby let's do some coke

46

05-25-2012, 11:27 AM #4

Then build it with 606 rods a 3.5 crank and have monster stroker 3.5 with twin chargers going to your eton m90 super charger and a 8mm pump...or just keep it stock but that's no fun

Hotrodbenz

05-25-2012, 11:27 AM #4

Then build it with 606 rods a 3.5 crank and have monster stroker 3.5 with twin chargers going to your eton m90 super charger and a 8mm pump...or just keep it stock but that's no fun

jWOLF

Naturally-aspirated

5

05-25-2012, 11:46 AM #5

Hotrodbenz, i do it later Rolleyes

but before i want do stock turbodiesel
then i set more powerfull turbo, intercooler
After that maybe build what you say Wink

Now i want to know what i must replace from 960 to my 912...

jWOLF

05-25-2012, 11:46 AM #5

Hotrodbenz, i do it later Rolleyes
but before i want do stock turbodiesel
then i set more powerfull turbo, intercooler
After that maybe build what you say Wink

Now i want to know what i must replace from 960 to my 912...

jWOLF

Naturally-aspirated

5

05-27-2012, 04:38 AM #6

a both motor are waiting for me
please, somebody tell me what i must to change Rolleyes

jWOLF

05-27-2012, 04:38 AM #6

a both motor are waiting for me
please, somebody tell me what i must to change Rolleyes

aaa

GT2256V

913

05-27-2012, 05:23 AM #7

Pump, cam, no electronics. You'll need the pistons (aka lower the compression ratio) if you want high boost.

aaa

05-27-2012, 05:23 AM #7

Pump, cam, no electronics. You'll need the pistons (aka lower the compression ratio) if you want high boost.

jWOLF

Naturally-aspirated

5

05-27-2012, 05:48 AM #8

Okey, I understood, thanks! Smile

So:
1. Pump
2. Both collectors
3. Pistons
4. Turbo
5. Exhaust manifold

jWOLF

05-27-2012, 05:48 AM #8

Okey, I understood, thanks! Smile
So:
1. Pump
2. Both collectors
3. Pistons
4. Turbo
5. Exhaust manifold

View a Printable Version

0 Vote(s) - 0 Average

Users browsing this thread:
4 Guest(s)