STD Tuning Drivetrain Idea tranny for om606

Idea tranny for om606

Idea tranny for om606

 
  • 0 Vote(s) - 0 Average
 
serverman777
GT2559V

226
07-16-2012, 10:01 PM #1
Last few weeks I been trying to get a plan together on how I will be getting my 606 into a w123/126. With a pic-a-part close at hand and with store credit (from buying a bad trans for my 190e) I feel like I could get something up there that came out of a mercedes for my 606 project. What would be a good idea for a auto 722.xxx trans for my case? IE bell housing bolts up to the block type deal. I understand that a custom length shaft is in order.

'84 300 SD w126 Race Car Wink
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
serverman777
07-16-2012, 10:01 PM #1

Last few weeks I been trying to get a plan together on how I will be getting my 606 into a w123/126. With a pic-a-part close at hand and with store credit (from buying a bad trans for my 190e) I feel like I could get something up there that came out of a mercedes for my 606 project. What would be a good idea for a auto 722.xxx trans for my case? IE bell housing bolts up to the block type deal. I understand that a custom length shaft is in order.


'84 300 SD w126 Race Car Wink
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver

Spaceraver
K26-2

40
07-19-2012, 07:23 AM #2
If you want a 722.6 transmission, get the 580 version. good for up to 580 Nm.. Then either the PCS TCM-2000 controller from http://www.soundgermanautomotive.com/ or a custom setup like Olefejer's.
The bellhousing should fit to any OM60x engine. Dunno about the 617 and so on.

I wouldn't mind getting an STD..Tongue
Spaceraver
07-19-2012, 07:23 AM #2

If you want a 722.6 transmission, get the 580 version. good for up to 580 Nm.. Then either the PCS TCM-2000 controller from http://www.soundgermanautomotive.com/ or a custom setup like Olefejer's.
The bellhousing should fit to any OM60x engine. Dunno about the 617 and so on.


I wouldn't mind getting an STD..Tongue

Nielsychop
Naturally-aspirated

12
07-25-2012, 09:08 AM #3
Sorry if this has been answered elsewhere, but how do you know if a 722.6 is 580NM proof? or is it all 722.6 boxes?

Edit: Found it, it's all 722.6 boxes Smile
This post was last modified: 07-26-2012, 03:17 AM by Nielsychop.
Nielsychop
07-25-2012, 09:08 AM #3

Sorry if this has been answered elsewhere, but how do you know if a 722.6 is 580NM proof? or is it all 722.6 boxes?

Edit: Found it, it's all 722.6 boxes Smile

raudmees
Naturally-aspirated

9
07-30-2012, 10:18 AM #4
(07-25-2012, 09:08 AM)Nielsychop Sorry if this has been answered elsewhere, but how do you know if a 722.6 is 580NM proof? or is it all 722.6 boxes?

Edit: Found it, it's all 722.6 boxes Smile

Where did you find this info?

I understood that just some boxes can handle 580NM and it is the boxes from v8Confused and stronger diesels.
raudmees
07-30-2012, 10:18 AM #4

(07-25-2012, 09:08 AM)Nielsychop Sorry if this has been answered elsewhere, but how do you know if a 722.6 is 580NM proof? or is it all 722.6 boxes?

Edit: Found it, it's all 722.6 boxes Smile

Where did you find this info?

I understood that just some boxes can handle 580NM and it is the boxes from v8Confused and stronger diesels.

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)