722.636 into w201

STD Tuning Drivetrain 722.636 into w201

722.636 into w201

Eric78

GT2559V

198

05-11-2013, 10:09 PM #1

Will fitting this transmission into a w201 require cutting the transmission tunnel or fabricating special mounts?

05-11-2013, 10:09 PM #1

Will fitting this transmission into a w201 require cutting the transmission tunnel or fabricating special mounts?

Eric78

GT2559V

198

05-17-2013, 11:44 PM #2

So will this go in to a w201 trans tunnel wihout cutting? It'll be delivered soon so I guess I'll find out for myself soon enough.

05-17-2013, 11:44 PM #2

So will this go in to a w201 trans tunnel wihout cutting? It'll be delivered soon so I guess I'll find out for myself soon enough.

Holset

559

05-18-2013, 08:56 AM #3

There are quite a few in the w201 chassis in europe and I have not heard that they had to cut anything. I bet it is tight though.

05-18-2013, 08:56 AM #3

There are quite a few in the w201 chassis in europe and I have not heard that they had to cut anything. I bet it is tight though.

K26-2

33

05-18-2013, 12:27 PM #4

Eric,

Do post your results. I want to use one behind my OM602 in my W201. If the 722.6 fits it will open the door to a OM605 swap!

Walt

05-18-2013, 12:27 PM #4

Eric,

Do post your results. I want to use one behind my OM602 in my W201. If the 722.6 fits it will open the door to a OM605 swap!

Walt

SuperCow

Naturally-aspirated

21

05-20-2013, 03:12 PM #5

I am also very interested in this.
I have heard you have to cut the tunnel.

1986 W201 190D 2.5 Diesel

05-20-2013, 03:12 PM #5

I am also very interested in this.
I have heard you have to cut the tunnel.

1986 W201 190D 2.5 Diesel

Users browsing this thread:
3 Guest(s)