STD Tuning Engine Garrett TD04L

Garrett TD04L

Garrett TD04L

 
  • 0 Vote(s) - 0 Average
 
cjcosta
TA 0301

51
11-24-2013, 12:28 PM #1
Hi everyone,

Anybody knows this turbo Garrett TD04L ?

Will it work in a OM617?
My T3 is is not ok i am searching alternatives to fast spool na low rpm beacuse the engine is instaled in a G300.
This turbo is used in a 2.8 engine iveco van ans its easy to find.

Best Regards,

Carlos
cjcosta
11-24-2013, 12:28 PM #1

Hi everyone,

Anybody knows this turbo Garrett TD04L ?

Will it work in a OM617?
My T3 is is not ok i am searching alternatives to fast spool na low rpm beacuse the engine is instaled in a G300.
This turbo is used in a 2.8 engine iveco van ans its easy to find.

Best Regards,

Carlos

majesty78
GT2559V

226
11-25-2013, 10:34 AM #2
The TD04 is not a Garrett Turbocharger, its made by MHI (Mitsubishi Heavy Industries).

As there are more than 450 different variances of the TD04 family you may post up more detailed informations of which turbo you are talking about.

Mercedes Benz W210 E-Class 320CDI, lowered 2.5", 18" AMG wheels, Decat, EGR removed, Tumble flaps removed, C30 AMG injectors, 400kpa MAP, Custom GT2566XTV turbo, SW tweaked to 300+hp/750NmBig Grin
majesty78
11-25-2013, 10:34 AM #2

The TD04 is not a Garrett Turbocharger, its made by MHI (Mitsubishi Heavy Industries).

As there are more than 450 different variances of the TD04 family you may post up more detailed informations of which turbo you are talking about.


Mercedes Benz W210 E-Class 320CDI, lowered 2.5", 18" AMG wheels, Decat, EGR removed, Tumble flaps removed, C30 AMG injectors, 400kpa MAP, Custom GT2566XTV turbo, SW tweaked to 300+hp/750NmBig Grin

Mark_M
GT2559V

206
11-25-2013, 12:34 PM #3
yes these turbo's are on lots of engines in various forms. Volvo, Subaru and Saab to name a few.
Mark_M
11-25-2013, 12:34 PM #3

yes these turbo's are on lots of engines in various forms. Volvo, Subaru and Saab to name a few.

EDH_Performance
Holset

537
11-29-2013, 04:21 AM #4
And they are baaaad quality! Don`t support high boost and flow
specially the td04 series...
EDH_Performance
11-29-2013, 04:21 AM #4

And they are baaaad quality! Don`t support high boost and flow
specially the td04 series...

Hario'
C300TD Wagon (W202)

894
12-01-2013, 07:19 PM #5
Not bad for a dirt cheap upgrade though.

I was considering fitting one to my 606 (stock manifold) by fabricating an adapter plate, from research they do flow more than the stock turbo, well more than my OEM KKK K-14 anyway




Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]
Hario'
12-01-2013, 07:19 PM #5

Not bad for a dirt cheap upgrade though.

I was considering fitting one to my 606 (stock manifold) by fabricating an adapter plate, from research they do flow more than the stock turbo, well more than my OEM KKK K-14 anyway





Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 5 Guest(s)
Users browsing this thread:
 5 Guest(s)