om602

STD Tuning Engine om602

om602

View a Printable Version

0 Vote(s) - 0 Average

llt6000

Naturally-aspirated

4

12-26-2013, 09:17 PM #1

hi
i have a w201 2.5D without turbo
and i would like very mutch to strap a turbo on too it
so what do i have too do with the diesel pump
my goal is only about 150-160 hp
do i have to get bigger elements or is there antoher option?

llt6000

12-26-2013, 09:17 PM #1

Duncansport

Holset

526

12-26-2013, 09:37 PM #2

http://www.superturbodiesel.com/std/Thre...300D--4514

Duncansport

12-26-2013, 09:37 PM #2

http://www.superturbodiesel.com/std/Thre...300D--4514

orion

K26-2

39

12-27-2013, 04:06 PM #3

Primarily you need an other engine. The 602 without turbo has other pistons, valves and the oil reservoir is larger than yours. Further the IP has an ALDA.

orion

12-27-2013, 04:06 PM #3

Primarily you need an other engine. The 602 without turbo has other pistons, valves and the oil reservoir is larger than yours. Further the IP has an ALDA.

llt6000

Naturally-aspirated

4

12-27-2013, 05:12 PM #4

okay thanks but if i then go for the om605 engine can i use the pump from my om602?

llt6000

12-27-2013, 05:12 PM #4

okay thanks but if i then go for the om605 engine can i use the pump from my om602?

Duncansport

Holset

526

12-27-2013, 06:29 PM #5

(12-27-2013, 05:12 PM)llt6000 okay thanks but if i then go for the om605 engine can i use the pump from my om602?

Sure can, direct bolt on. Most parts will swap over from the 602 to the 605. EPC even shows a lot of 602 parts make up the 605..

Duncansport

12-27-2013, 06:29 PM #5

(12-27-2013, 05:12 PM)llt6000 okay thanks but if i then go for the om605 engine can i use the pump from my om602?

Sure can, direct bolt on. Most parts will swap over from the 602 to the 605. EPC even shows a lot of 602 parts make up the 605..

View a Printable Version

0 Vote(s) - 0 Average

Users browsing this thread:
4 Guest(s)