Exhaust Line
Exhaust Line
03-03-2014, 07:04 AM
#1
For a power of between 300.350 hp in a om605, what line of exhaust should I do? 70mm or 76mm?
bruno_pinho
03-03-2014, 07:04 AM #1Hi
For a power of between 300.350 hp in a om605, what line of exhaust should I do? 70mm or 76mm?
03-03-2014, 09:12 AM
#2
(03-03-2014, 07:04 AM)bruno_pinho Hi
For a power of between 300.350 hp in a om605, what line of exhaust should I do? 70mm or 76mm?
76mm
Duncansport
03-03-2014, 09:12 AM #2(03-03-2014, 07:04 AM)bruno_pinho Hi
For a power of between 300.350 hp in a om605, what line of exhaust should I do? 70mm or 76mm?
76mm
03-03-2014, 09:37 AM
#4
This post was last modified: 03-03-2014, 09:37 AM by bruno_pinho.
03-03-2014, 10:58 AM
#6
(03-03-2014, 10:25 AM)Stamsaas I know that, but i asked how much 3" flowes in power.
I know ill catch shit for this...but i think 3 inch with a proper muffler and pipe work is sufficient for 550hp
I made 400whp with a gas 4 cylinder (Conquest/Starion) on 2.5 exhaust.
Duncansport
03-03-2014, 10:58 AM #6(03-03-2014, 10:25 AM)Stamsaas I know that, but i asked how much 3" flowes in power.
I know ill catch shit for this...but i think 3 inch with a proper muffler and pipe work is sufficient for 550hp
I made 400whp with a gas 4 cylinder (Conquest/Starion) on 2.5 exhaust.
03-04-2014, 01:32 PM
#9
You can push a lot of power trough a small pipe. But bigger is better...
Build 3" that will work for most power outputs. Just keep the heat in the system for as long as you can to maintain gas velocity.
F-tune Performance
![[Image: V-band_om606.jpg]](http://www.f-tune.se/wp-content/uploads/2015/01/V-band_om606.jpg)
![[Image: GTX3582R.jpg]](http://www.f-tune.se/wp-content/uploads/2015/01/GTX3582R.jpg)
![[Image: gs6-53dz_gearbox.jpg]](http://www.f-tune.se/wp-content/uploads/2015/01/gs6-53dz_gearbox.jpg)
I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.
3" is good enough.
You can push a lot of power trough a small pipe. But bigger is better...
Build 3" that will work for most power outputs. Just keep the heat in the system for as long as you can to maintain gas velocity.
F-tune Performance
I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.
03-06-2014, 05:26 AM
#10
(03-04-2014, 01:32 PM)F.R.A.S 3" is good enough.
You can push a lot of power trough a small pipe. But bigger is better...
Build 3" that will work for most power outputs. Just keep the heat in the system for as long as you can to maintain gas velocity.
3" with muffler is to small in my opinion...I feelt biig diference with and without my straight through muffler
EDH_Performance
03-06-2014, 05:26 AM #10(03-04-2014, 01:32 PM)F.R.A.S 3" is good enough.
You can push a lot of power trough a small pipe. But bigger is better...
Build 3" that will work for most power outputs. Just keep the heat in the system for as long as you can to maintain gas velocity.
3" with muffler is to small in my opinion...I feelt biig diference with and without my straight through muffler
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)