M and MW pump Delivery Valve difference
M and MW pump Delivery Valve difference
before I dismantle one of my M pumps
can someone share some infoabout M and MW pump delivery valve / druckventil compatibility.
for the pes5MW55 pump DV pn is 1 418 512 008,so...can those be used
in pes5M55 pump and vice versa?
thanks
edit: according the mercedes codes it is same - 0000747584 ; 0000741115; 0000742215
.
500SEC euro gen II powered by OM617a stolen from 84 300SD .... with 280se transmission now
----------------------------------------------------------
.
hi guys
before I dismantle one of my M pumps can someone share some info
about M and MW pump delivery valve / druckventil compatibility.
for the pes5MW55 pump DV pn is 1 418 512 008,so...can those be used
in pes5M55 pump and vice versa?
thanks
edit: according the mercedes codes it is same - 0000747584 ; 0000741115; 0000742215
.
500SEC euro gen II powered by OM617a stolen from 84 300SD .... with 280se transmission now
----------------------------------------------------------
.
(03-31-2014, 03:39 AM)cho hi guysNo you cant use MW deliveryvalves in M-serie. Dont fit. M-serie can be used in MW but they have not the correct outside diameter so you need some kind oring that puts the valve in centre of the element.
before I dismantle one of my M pumps
about M and MW pump delivery valve / druckventil compatibility.
for the pes5MW55 pump DV pn is 1 418 512 008,so...can those be used
in pes5M55 pump and vice versa?
thanks
edit: according the mercedes codes it is same - 0000747584 ; 0000741115; 0000742215
.
dieselmeken
03-31-2014, 09:29 AM #2(03-31-2014, 03:39 AM)cho hi guysNo you cant use MW deliveryvalves in M-serie. Dont fit. M-serie can be used in MW but they have not the correct outside diameter so you need some kind oring that puts the valve in centre of the element.
before I dismantle one of my M pumps
about M and MW pump delivery valve / druckventil compatibility.
for the pes5MW55 pump DV pn is 1 418 512 008,so...can those be used
in pes5M55 pump and vice versa?
thanks
edit: according the mercedes codes it is same - 0000747584 ; 0000741115; 0000742215
.
while we are on DV topic,..last time when I changed my DV's on MW pump
after taking DV holder off fuel was squirting like 15 minutes.. 0.5L went out... I watched Goran's video on dv change (om602 I think...) and there was no fuel at all....is this normal or I hit some weird tdc angle...?
.
500SEC euro gen II powered by OM617a stolen from 84 300SD .... with 280se transmission now
----------------------------------------------------------
.
..
while we are on DV topic,..last time when I changed my DV's on MW pump
after taking DV holder off fuel was squirting like 15 minutes.. 0.5L went out... I watched Goran's video on dv change (om602 I think...) and there was no fuel at all....is this normal or I hit some weird tdc angle...?
.
500SEC euro gen II powered by OM617a stolen from 84 300SD .... with 280se transmission now
----------------------------------------------------------
.
I was messing around with my pump last week and when I took of the pre pump, fuel kept dripping from the fuel lines. I think this is from the fuel tank as the heat expands it a little bit. I don't know if there's a little hole for the air to enter the tank. If so than it's probably because my tank sits behind the back seat and was nearly filled. And the pump sits lower than the fuel level.
3 Guest(s)
3 Guest(s)