OM602, serious walk
OM602, serious walk
06-24-2014, 04:14 AM
#1
For the time being I still have the 0m602 in my 190d (the OM605 is waiting to be put in), I'd been having some serious rocking issues which I thought were the mounts but it's got new 6 cyl mounts now & it still has some vibration issues, it's fine driving around town but if I've been on the open road doing 80-110km/h for a while & then come into a town & have to do 50-60km/h or stop moving I get serious walk(engine see-sawing back & forth) happening, what would be causing this?
06-25-2014, 09:16 AM
#5
(06-25-2014, 05:20 AM)cho worn delivery valves on IP
you can change those without bench table
need a spline tool also....
.
+1 on this...
I had a number of older 190E 2.5TD's (customers cars) that had this same issue. Basically a part misfire at lower RPM's. Sent the pumps out for rebuild and problem was cured.
Duncansport
06-25-2014, 09:16 AM #5(06-25-2014, 05:20 AM)cho worn delivery valves on IP
you can change those without bench table
need a spline tool also....
.
+1 on this...
I had a number of older 190E 2.5TD's (customers cars) that had this same issue. Basically a part misfire at lower RPM's. Sent the pumps out for rebuild and problem was cured.
Users browsing this thread:
6 Guest(s)
6 Guest(s)
Users browsing this thread:
6 Guest(s)
6 Guest(s)