STD Tuning Body Mods W123 Wheels

W123 Wheels

W123 Wheels

 
  • 0 Vote(s) - 0 Average
 
Pomidori
Choo-Choo

10
08-15-2014, 03:18 PM #1
Hi everyone, I have been looking around for a new set of wheels for my W123. I'm rocking 14" steelies at the moment but as far as aftermarket wheels go, the 5x112 sizes on ebay almost always have a big offset. I notice that people are able to fit all sorts of different wheels on their cars, so maybe there's something I am missing when it comes to fitment.

Cheers
Pomidori
08-15-2014, 03:18 PM #1

Hi everyone, I have been looking around for a new set of wheels for my W123. I'm rocking 14" steelies at the moment but as far as aftermarket wheels go, the 5x112 sizes on ebay almost always have a big offset. I notice that people are able to fit all sorts of different wheels on their cars, so maybe there's something I am missing when it comes to fitment.

Cheers

Simpler=Better
PORTED HEAD

2,127
08-15-2014, 03:30 PM #2
Ford Mustang V6 15" alloys were really light and fit my w123 well. I just ran them with slightly longer lug bolts, some people reccomend using wobble bolts. YMMV just a suggestion.

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
08-15-2014, 03:30 PM #2

Ford Mustang V6 15" alloys were really light and fit my w123 well. I just ran them with slightly longer lug bolts, some people reccomend using wobble bolts. YMMV just a suggestion.


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

Pomidori
Choo-Choo

10
08-15-2014, 03:45 PM #3
I had no idea mustang wheels would fit. I might be able to pick up a set for cheap since they're more common.
Pomidori
08-15-2014, 03:45 PM #3

I had no idea mustang wheels would fit. I might be able to pick up a set for cheap since they're more common.

MFSuper90
Budget Builder

1,533
08-18-2014, 03:56 PM #4
Besides mustang wheels being ugly... haha
I searched for a long time to find a set of rims I could actually afford and that I liked.

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
08-18-2014, 03:56 PM #4

Besides mustang wheels being ugly... haha
I searched for a long time to find a set of rims I could actually afford and that I liked.


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

sassparilla_kid
diesel > all other fuels

1,618
08-19-2014, 01:51 AM #5
Try summit racing, they have all sorts of wheels

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
08-19-2014, 01:51 AM #5

Try summit racing, they have all sorts of wheels


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

Simpler=Better
PORTED HEAD

2,127
08-19-2014, 08:28 AM #6
My pics are down, but the 2003? v6 wheels look good. Paint the merc star over the mustang and you're golden.

[Image: 102823d1277522146-need-help-finding-oem-...to0100.jpg]

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
08-19-2014, 08:28 AM #6

My pics are down, but the 2003? v6 wheels look good. Paint the merc star over the mustang and you're golden.

[Image: 102823d1277522146-need-help-finding-oem-...to0100.jpg]


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

Purplecomputer
Slowness 220D

897
08-19-2014, 09:02 AM #7
BBS RS's son
Purplecomputer
08-19-2014, 09:02 AM #7

BBS RS's son

mbz123
GT2256V

122
09-16-2014, 09:45 AM #8
(08-19-2014, 09:02 AM)Purplecomputer BBS RS's son

I don't always roll deep with the shiny shoes, but when I do, I prefer BBS. Stay OE my friends.

MBZ123

PS And for the love of our affliction, just say NO to chinese garbage. Your country depends on you!
mbz123
09-16-2014, 09:45 AM #8

(08-19-2014, 09:02 AM)Purplecomputer BBS RS's son

I don't always roll deep with the shiny shoes, but when I do, I prefer BBS. Stay OE my friends.

MBZ123

PS And for the love of our affliction, just say NO to chinese garbage. Your country depends on you!

wolverine
TA 0301

57
10-24-2014, 08:16 PM #9
X3 BBS RS's OR AMG Pentas (dished ones, not flat)

When properly done with centering rings, wobble bolts would work fine on 5x4.5" wheels on our MB's. I was gonna buy a set of BBS RS's from vrwheels.com (they always have plenty of 16" ones) But happened to find a guy on CL with 5x112 RS's so I snatched those up instead.

I relipped them with 3.5" lips in the front. Yes they fit with a little fender rolling and the right stretched tire. LOL

Theres also never a shortage of wheels for sale on stanceworks.com Youll have to scroll through pages and pages though.
wolverine
10-24-2014, 08:16 PM #9

X3 BBS RS's OR AMG Pentas (dished ones, not flat)

When properly done with centering rings, wobble bolts would work fine on 5x4.5" wheels on our MB's. I was gonna buy a set of BBS RS's from vrwheels.com (they always have plenty of 16" ones) But happened to find a guy on CL with 5x112 RS's so I snatched those up instead.

I relipped them with 3.5" lips in the front. Yes they fit with a little fender rolling and the right stretched tire. LOL

Theres also never a shortage of wheels for sale on stanceworks.com Youll have to scroll through pages and pages though.

MTUPower
looking for more power on a daily driver

288
10-25-2014, 08:08 AM #10
Here's how to add "ET" to the w123 so it can fit larger et wheels.

http://www.peachparts.com/shopforum/whee...-w123.html
This post was last modified: 10-25-2014, 08:09 AM by MTUPower.

2005 CDI heavily modified 1984 300TD - Myna pump/TMIC/enlarged PC's/HX30Super/W126 II front brakes/Vogtland springs/EGT +Boost gauges/H4 Hella's
MTUPower
10-25-2014, 08:08 AM #10

Here's how to add "ET" to the w123 so it can fit larger et wheels.

http://www.peachparts.com/shopforum/whee...-w123.html


2005 CDI heavily modified 1984 300TD - Myna pump/TMIC/enlarged PC's/HX30Super/W126 II front brakes/Vogtland springs/EGT +Boost gauges/H4 Hella's

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 
Users browsing this thread: