om603 6mm elements
om603 6mm elements
12-16-2014, 07:40 PM
#5
PedroFerreira
12-16-2014, 07:40 PM #5the om605 whith 6mm (stock) can do 260hp.om603 whith 6mm ip can produce 240?or less?
12-17-2014, 01:58 PM
#8
This post was last modified: 12-17-2014, 01:59 PM by rafael cotrim.
If it don`t blow smoke , it must be broke ! W201-
rafael cotrim
12-17-2014, 01:58 PM #8Pedro , Is what i already have told you, I guess....
If it don`t blow smoke , it must be broke ! W201-
12-26-2014, 10:47 AM
#9
http://www.maxxtuning.se/kundbilar/effek...w123--jim/
Om605 with 6mm on dyno 274hp on crank.
http://www.maxxtuning.se/kundbilar/effek...w123--jim/
12-26-2014, 03:31 PM
#10
(12-26-2014, 10:47 AM)MrHope Om605 with 6mm on dyno 274hp on crank.
http://www.maxxtuning.se/kundbilar/effek...w123--jim/
I do not believe in 174 to 1.5bar...
bruno_pinho
12-26-2014, 03:31 PM #10(12-26-2014, 10:47 AM)MrHope Om605 with 6mm on dyno 274hp on crank.
http://www.maxxtuning.se/kundbilar/effek...w123--jim/
I do not believe in 174 to 1.5bar...
12-26-2014, 04:35 PM
#11
(12-26-2014, 03:31 PM)bruno_pinho(12-26-2014, 10:47 AM)MrHope Om605 with 6mm on dyno 274hp on crank.
http://www.maxxtuning.se/kundbilar/effek...w123--jim/
I do not believe in 174 to 1.5bar...
What don't you believe ? That engine is only making 380 NM's of torque but with the torque curve shifted up in the rpm range to make more power.
(12-26-2014, 03:31 PM)bruno_pinho(12-26-2014, 10:47 AM)MrHope Om605 with 6mm on dyno 274hp on crank.
http://www.maxxtuning.se/kundbilar/effek...w123--jim/
I do not believe in 174 to 1.5bar...
What don't you believe ? That engine is only making 380 NM's of torque but with the torque curve shifted up in the rpm range to make more power.
12-26-2014, 04:43 PM
#12
(12-26-2014, 10:47 AM)MrHope Om605 with 6mm on dyno 274hp on crank.
http://www.maxxtuning.se/kundbilar/effek...w123--jim/
Very nice, is that yours?
-------------------------------------------------------------------------------------------------------------------------
Ex: 525tds 130kW, C250TD 160kW, E320CDI 200kW, ML400CDI 230kW, A6 R5TDI 130kW
Now: Q7 V8TDI 240kW, 320d 150kW, 335d 210kW
(12-26-2014, 10:47 AM)MrHope Om605 with 6mm on dyno 274hp on crank.
http://www.maxxtuning.se/kundbilar/effek...w123--jim/
Very nice, is that yours?
-------------------------------------------------------------------------------------------------------------------------
Ex: 525tds 130kW, C250TD 160kW, E320CDI 200kW, ML400CDI 230kW, A6 R5TDI 130kW
Now: Q7 V8TDI 240kW, 320d 150kW, 335d 210kW
12-26-2014, 04:49 PM
#13
(12-26-2014, 04:35 PM)Petar(12-26-2014, 03:31 PM)bruno_pinho(12-26-2014, 10:47 AM)MrHope Om605 with 6mm on dyno 274hp on crank.
http://www.maxxtuning.se/kundbilar/effek...w123--jim/
I do not believe in 174 to 1.5bar...
What don't you believe ? That engine is only making 380 NM's of torque but with the torque curve shifted up in the rpm range to make more power.
Sorry but I do not believe these numbers to 1.5bar ...
bruno_pinho
12-26-2014, 04:49 PM #13(12-26-2014, 04:35 PM)Petar(12-26-2014, 03:31 PM)bruno_pinho(12-26-2014, 10:47 AM)MrHope Om605 with 6mm on dyno 274hp on crank.
http://www.maxxtuning.se/kundbilar/effek...w123--jim/
I do not believe in 174 to 1.5bar...
What don't you believe ? That engine is only making 380 NM's of torque but with the torque curve shifted up in the rpm range to make more power.
Sorry but I do not believe these numbers to 1.5bar ...
12-26-2014, 05:08 PM
#14
6mm can't ever do 300hp forget about that.
F-tune Performance
![[Image: V-band_om606.jpg]](http://www.f-tune.se/wp-content/uploads/2015/01/V-band_om606.jpg)
![[Image: GTX3582R.jpg]](http://www.f-tune.se/wp-content/uploads/2015/01/GTX3582R.jpg)
![[Image: gs6-53dz_gearbox.jpg]](http://www.f-tune.se/wp-content/uploads/2015/01/gs6-53dz_gearbox.jpg)
I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.
That's not 6mm elements in that video and the owner Jim is a friend of mine.
6mm can't ever do 300hp forget about that.
F-tune Performance
I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.
12-26-2014, 05:22 PM
#15
(12-26-2014, 05:08 PM)F.R.A.S That's not 6mm elements in that video and the owner Jim is a friend of mine.
6mm can't ever do 300hp forget about that.
I did 260cv and 417nm with 6mm and electric pump with 1.8,1.9bar..
This post was last modified: 12-27-2014, 07:37 AM by bruno_pinho.
bruno_pinho
12-26-2014, 05:22 PM #15(12-26-2014, 05:08 PM)F.R.A.S That's not 6mm elements in that video and the owner Jim is a friend of mine.
6mm can't ever do 300hp forget about that.
I did 260cv and 417nm with 6mm and electric pump with 1.8,1.9bar..
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)