m pump in 605
m pump in 605
discovery 2 fitted om605 m pump 7.5 elements 300 turbo at mo
c250 std at mo
off road buggy fitting om 606 turbo ? supercharger ? to follow
www.gaz-fab.co.uk www.facebook.com/gazfab
gary andrews
01-06-2015, 05:17 PM #1hi i have just fitted my m pump with 7.5 elements to my 605 but to get it in i had to remove oil cooler and oil fitter housing. so do i need to block the water ways up e.g. core plugs,and the fitter housing do i need to get another one if so off what ? or what is the done thing for to sort these two cheers
discovery 2 fitted om605 m pump 7.5 elements 300 turbo at mo
c250 std at mo
off road buggy fitting om 606 turbo ? supercharger ? to follow
www.gaz-fab.co.uk www.facebook.com/gazfab
(01-06-2015, 05:17 PM)gary andrews hi i have just fitted my m pump with 7.5 elements to my 605 but to get it in i had to remove oil cooler and oil fitter housing. so do i need to block the water ways up e.g. core plugs,and the fitter housing do i need to get another one if so off what ? or what is the done thing for to sort these two cheers
You should be able to have the oilcooler there as that motor comes with mechanical m-pump from factory
Maybe you have the om602 mechanical m-pump with the funny lump on the back of the pump?
EDH_Performance
01-06-2015, 08:47 PM #2(01-06-2015, 05:17 PM)gary andrews hi i have just fitted my m pump with 7.5 elements to my 605 but to get it in i had to remove oil cooler and oil fitter housing. so do i need to block the water ways up e.g. core plugs,and the fitter housing do i need to get another one if so off what ? or what is the done thing for to sort these two cheers
You should be able to have the oilcooler there as that motor comes with mechanical m-pump from factory
Maybe you have the om602 mechanical m-pump with the funny lump on the back of the pump?
discovery 2 fitted om605 m pump 7.5 elements 300 turbo at mo
c250 std at mo
off road buggy fitting om 606 turbo ? supercharger ? to follow
www.gaz-fab.co.uk www.facebook.com/gazfab
gary andrews
01-07-2015, 03:01 AM #3yes that sounds like the pump i have
discovery 2 fitted om605 m pump 7.5 elements 300 turbo at mo
c250 std at mo
off road buggy fitting om 606 turbo ? supercharger ? to follow
www.gaz-fab.co.uk www.facebook.com/gazfab
F-tune Performance
![[Image: V-band_om606.jpg]](http://www.f-tune.se/wp-content/uploads/2015/01/V-band_om606.jpg)
![[Image: GTX3582R.jpg]](http://www.f-tune.se/wp-content/uploads/2015/01/GTX3582R.jpg)
![[Image: gs6-53dz_gearbox.jpg]](http://www.f-tune.se/wp-content/uploads/2015/01/gs6-53dz_gearbox.jpg)
I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.
Cut a flat plate to mount on the back of the pump
F-tune Performance
I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.
discovery 2 fitted om605 m pump 7.5 elements 300 turbo at mo
c250 std at mo
off road buggy fitting om 606 turbo ? supercharger ? to follow
www.gaz-fab.co.uk www.facebook.com/gazfab
gary andrews
01-11-2015, 05:05 AM #6ive blanked the core plugs and fitter housing for now ill use external cooler later ,cheers
discovery 2 fitted om605 m pump 7.5 elements 300 turbo at mo
c250 std at mo
off road buggy fitting om 606 turbo ? supercharger ? to follow
www.gaz-fab.co.uk www.facebook.com/gazfab
Installed:
OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. [/i]
Well OM606 uses front mounted oil cooler so for future reference could use a OM606 oil filter housing and connect the two oil fittings together in a loop? Assming it also blocks off the OM605 water fittings in the block?
Installed:
OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. [/i]
best way of doing: go in a scrap yard buy a oil filter support from a G o M, those come with oil radiator any motor have them, even the sangyoung 4 whellers. 601,2,3,4,5,6 are interchangeable, so anyone goes.
to cover the cyl head holes use expansion taps,(dont know the correct name in english) can buy them from MB or in any automotive retail store.
regards.
FD,
Powered by tractor fuel
hy there,
best way of doing: go in a scrap yard buy a oil filter support from a G o M, those come with oil radiator any motor have them, even the sangyoung 4 whellers. 601,2,3,4,5,6 are interchangeable, so anyone goes.
to cover the cyl head holes use expansion taps,(dont know the correct name in english) can buy them from MB or in any automotive retail store.
regards.
FD,
Powered by tractor fuel
3 Guest(s)
3 Guest(s)