6spd manual list, pdf
6spd manual list, pdf
12-25-2014, 05:08 PM
#1
Attached Files
lost in the diesel universe.............
As you can see in the atachment, there are plenty of 716.6xx trannys, let's hear everyone's experience with these boxes and try to solve the number misterys. Johann used 716.654 box on his STD w124 succesfully. So are the higher numbers better or not?
Attached Files
lost in the diesel universe.............
Nice find!
but does anyone know the the measurements between:
IN Metric 
1, from motor flange to gearshift ?
2, from motor flange to utput flange ? (without the rubber ring)
Hope u like my photoshop skills! 
01-10-2015, 01:27 PM
#3
(01-10-2015, 12:42 PM)MrHope 2, from motor flange to utput flange ? (without the rubber ring)
I measured 53 cm at my 716.641 from 270cdi,
Greets
Max
______________________________________________________________
93´ W124 300TDT -> OM606.962 / RS 203 Dieselmeken 7,5mm 210cc / KKK K14 / Stock Transmission / 2,65 ASD
89´ 190D 2.5 Turbo -> OM605.960 / Dieselmeken 7,5mm 180cc / Holset HX30 Super / 716. 654 6-Speed / 2,87 Rear Axle
(01-10-2015, 12:42 PM)MrHope 2, from motor flange to utput flange ? (without the rubber ring)
I measured 53 cm at my 716.641 from 270cdi,
Greets
Max
______________________________________________________________
93´ W124 300TDT -> OM606.962 / RS 203 Dieselmeken 7,5mm 210cc / KKK K14 / Stock Transmission / 2,65 ASD
89´ 190D 2.5 Turbo -> OM605.960 / Dieselmeken 7,5mm 180cc / Holset HX30 Super / 716. 654 6-Speed / 2,87 Rear Axle
01-10-2015, 04:46 PM
#4
(01-10-2015, 01:27 PM)Max(01-10-2015, 12:42 PM)MrHope 2, from motor flange to utput flange ? (without the rubber ring)
I measured 53 cm at my 716.641 from 270cdi,
Greets
Max
so its about the same as a 5spd ? if im not totally wrong my 717.460 is about 50cm~
01-11-2015, 07:40 AM
#5
the "normal" 5-Speed (717.411 etc..) are shorter.
My 717.430 (190D 2,5 Turbo 5-Speed) ist about 48 cm
The 717.450 (Dogleg from m104 3.0 24V) ist about 53 cm
Tahts all i got
Greets
Max
______________________________________________________________
93´ W124 300TDT -> OM606.962 / RS 203 Dieselmeken 7,5mm 210cc / KKK K14 / Stock Transmission / 2,65 ASD
89´ 190D 2.5 Turbo -> OM605.960 / Dieselmeken 7,5mm 180cc / Holset HX30 Super / 716. 654 6-Speed / 2,87 Rear Axle
Hi,
the "normal" 5-Speed (717.411 etc..) are shorter.
My 717.430 (190D 2,5 Turbo 5-Speed) ist about 48 cm
The 717.450 (Dogleg from m104 3.0 24V) ist about 53 cm
Tahts all i got
Greets
Max
______________________________________________________________
93´ W124 300TDT -> OM606.962 / RS 203 Dieselmeken 7,5mm 210cc / KKK K14 / Stock Transmission / 2,65 ASD
89´ 190D 2.5 Turbo -> OM605.960 / Dieselmeken 7,5mm 180cc / Holset HX30 Super / 716. 654 6-Speed / 2,87 Rear Axle
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)